User's Manual

Loading Print Media |

195

4 Before loading the print media, flex and fan the sheets. Straighten the edges of the

stack on a level surface.

5 Load the print media into the tray with the recommended print side facing up.

NOTE:

• Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

• When loading coated paper, load one sheet at a time.

• When loading letterhead, pre-printed, or pre-punched paper, see "Loading Letterhead,

Pre-Printed, and Pre-Punched Paper."

6 Make sure that paper guides rest lightly against the edge of the print media stack.

NOTE:

• Overtightening the guides may cause jams.

NOTE:

• When loading user-specified print media, adjust the width guides and slide the extendable

part of the tray by pinching the length guide and sliding it until it rests lightly against the edge

of the paper.

7 Insert the tray into the printer and push until it stops.