User's Manual
Dell™ Printer Configuration Web Tool |
173
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP
Server, LDAP Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter, and
SMTP Domain Filtering pages.
Set Password
Specifies the password that is required to access the setup parameters of the printer
from the Dell Printer Configuration Web Tool. This page can also be displayed by
clicking Set Password in the left frame.
NOTE:
• To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
• You can set the password for access to Admin Settings.
Authentication System
Specifies the server authentication type, the server response time-out, or the search
time-out.
*
This is available on Dell S2825cdn.
Kerberos Server
Specifies the settings for the Kerberos server.
*
This is available on Dell S2825cdn.
Restart Printer Click Start to restart the printer.
Administrator Password Sets the password using up to 128 alphanumeric characters.
Re-enter Administrator Password Confirms the set password.
Access denial by the
authentication failure of the
Administrator
Sets the amount of time the administrator should wait for the access
to the printer setup from Dell Printer Configuration Web Tool. The
access is denied if the time-out time is exceeded. If you set 0, this
mode is disabled.
Authentication
Type
Authentication
System Settings
Select the authentication system from the list.
Authentication
Type (for
ColorTrack
PRO)
*
Authentication
System Settings
Select the authentication system from the list. When the server you
are accessing uses the Kerberos authentication, select Kerberos
(Windows) as the authentication method and specify the server
settings in "Kerberos Server."
Optional
Information
Server
Response
Time-Out
Sets the amount of time the printer should wait for response from the
server.
Search
Time-Out
Sets the amount of time the printer should wait for searching for the
server.
Kerberos Server IP Address /
Host Name &
Port
Sets the IP address or host name, and the port address. The port
address must be 88 or between 5000 and 65535.
Domain Name Specifies each information.
Kerberos Server
(for ColorTrack
PRO)
*
IP Address /
Host Name &
Port
Sets the IP address or host name, and the port address. The port
address must be 88 or between 5000 and 65535.
Domain Name Enter the domain name.