User's Manual

168 | Dell™ Printer Configuration Web Tool
*1
This is available on Dell H625cdw and Dell H825cdw.
*2
The default value can be changed by using Dell Printer Configuration Web Tool.
*3
This item is available only when Wi-Fi Direct is set to Enable.
The Wi-Fi Direct feature is available on Dell H625cdw and Dell H825cdw.
SNMP v3
*
Edits the detailed settings of SNMP v3 protocol.
To enter this page, click Edit SNMP v3 Properties in the SNMP page.
*
This is available on Dell H625cdw and Dell H825cdw.
Scan to Network Folder
Specifies the client when scanning data.
Trap
Notification 1-4
Trap Address
Type
Select the check boxes to notify trap occurrence. In this case, specify
the IP address and IP socket in the following format:
Trap Address IPv4
Specify the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section of nnn is a variable
value between 0 and 255. Note that values 127 and 224-254 are not
valid for the first three-digits only. IP socket mmmmm is a variable
value between 0 and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each
section of XXXX is a hexadecimal variable value between 0 and ffff. IP
socket mmmmm is a variable value between 0 and 65,535.
Port Number
Notify
Network
*3
Authenticate
Error Trap
Select the check box to notify Authenticate Error Trap.
Administrator
Account
Account
Enabled
Select the check box to enable the administrator account.
User Name Enters the user name of the administrator account.
Authentication
Password
Sets the authentication password of the administrator account using
8 to 32 alphanumeric characters.
Re-enter
Authentication
Password
Confirms the set password.
Privacy
Password
Sets the privacy password of the administrator account using 8 to 32
alphanumeric characters.
Re-enter
Privacy
Password
Confirms the set password.
Print Drivers /
Remote Client
Account
Account
Enabled
Select the check box to enable the print drivers and remote client
account.
Reset to default
Password
Click to reset the password for the print drivers and remote client
account to default.
FTP Client Connection
Time-Out
Sets the connection time-out period.
FTP Passive Sets whether to enable the FTP Passive mode.