User's Manual

Dell™ Printer Configuration Web Tool | 167
*
This is available on Dell H625cdw and Dell H825cdw.
SNMP
Configures the detailed settings of SNMP.
LAN1
*
Host Name Sets the host name up to 63 alphanumeric characters and "-"
(hyphen). The original setting remains valid if no input is made.
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting remains valid if no input is made.
Wide-Area
Bonjour
Select the check box to enable the Wide-Area Bonjour protocol.
LAN2
*
Host Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting remains valid if no input is made.
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting remains valid if no input is made.
SNMP
Configuration
*1
Enable SNMP
v1/v2c Protocol
Select the check box to enable the SNMP v1/v2c protocol.
Edit SNMP
v1/v2c
Properties
Click to display the SNMP v1/v2c page and to edit the setting of
SNMP v1/v2c protocol from the page.
Enable SNMP v3
Protocol
Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the SNMP v3 page and to edit the setting of SNMP v3
protocol from the page.
You can click this item only when SSL communication is enabled.
Community
Name
Community
Name (Read
only)
*2
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting remains valid if no input is made. Characters
entered for community name in the previous settings are not
displayed on the screen. The default Read Community is public.
Re-enter
Community
Name (Read
only)
*2
Enters the community name to access (read only) data again to check
it.
Community
Name
(Read/Write)
*2
Sets the community name to access (read and write) data using up to
31 alphanumeric characters.
The original setting remains valid if no input is made. Characters
entered for community name in the previous settings are not
displayed on the screen. The default Read/Write Community is
private.
Re-enter
Community
Name
(Read/Write)
*2
Enters the community name to access (read and write) data again to
check it.
Community
Name (Trap)
*2
Sets the community name used for trap up to 31 alphanumeric
characters.
The original setting remains valid if no input is made. Characters
entered for Community Name (Trap) in the previous settings are not
displayed on the screen. The default Trap Community is " " (NULL).
Re-enter
Community
Name (Trap)
*2
Enters the community name used for trap again to check it.