User's Manual

Dell™ Printer Configuration Web Tool | 155
Scan Defaults
Creates your own default Scan settings.
Forwarding
E-mail Address 3
Forwarding
E-mail Address 4
Forwarding
E-mail Address 5
Server Type Sets the server type.
Server Address Sets the server address registered under the server ID.
Server Port
Number
Sets the server port number.
Login Name Sets the login name.
Login Password Sets the login password.
Re-enter
Password
Enter the password again to check it.
Share Name Sets the shared name.
Server Path Sets the server path.
Redial Attempts Sets the number of redial attempts to make if the destination fax
number is busy. If you enter 0, the printer does not redial.
Interval of
Redial
Sets the interval between redial attempts.
Resend Delay Sets the interval between re-send attempts.
Tone/Pulse Sets whether to use tone or pulse dialing.
Prefix Dial Sets whether to set a prefix dial number.
Prefix Dial
Number
Sets a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).
Fax Cover Page Sets whether to attach a cover page to faxes.
Fax Header Sets whether to print the information of the sender on the header of
faxes.
ECM Sets whether to enable the Error Correction Mode (ECM). To use the
ECM, the remote machines must also support the ECM.
Modem Speed Allows you to adjust the fax modem speed when a fax transmission or
reception error occurs.
Display Manual
Fax Recipients
Sets whether to show the fax number of the recipient on the
Sending Fax screen when manually sending a fax.
Fax Activity Sets whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.
Fax Transmit Sets whether to print a transmission report after every fax
transmission or only when an error occurs.
Fax Broadcast Sets whether to print a transmission report after every fax
transmission to multiple destinations or only when an error occurs.
Fax Protocol Sets whether to print the protocol monitor report after every fax
transmission or only when an error occurs.
File Format Sets the file format in which scanned data is to be saved.
Output Color Sets whether to scan in color or in black and white.
Resolution Sets the default scan resolution.