User's Manual

154 | Dell™ Printer Configuration Web Tool
Line Monitor Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is made.
DRPD Pattern Sets the Distinctive Ring Pattern Detection (DRPD) setting from
Pattern1 to Pattern7.
DRPD is a service provided by some telephone companies.
Receive Mode Telephone Automatic fax reception is turned off. You can receive a fax by picking
up the handset of the external telephone and then pressing a remote
receive code, or by tapping Manual Receive in On Hook and then
tapping Receive. For details about Manual Receive, see "Receiving
a Fax Manually."
Fax Automatically receives faxes.
Telephone/Fax When the printer receives an incoming fax, the external telephone
rings for the time specified in Auto Receive Tel/Fax, and then the
printer receives a fax. If an incoming call is not a fax, the printer beeps
from the internal speaker indicating that the call is a telephone call.
Ans
Machine/Fax
The printer can share a telephone line with an answering machine. In
this mode, the printer monitors the fax signal and pick up the line if
there are fax tones. If the telephone communication in your country
is serial, this mode is not supported.
DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a
separate number for faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring pattern.
Ring Tone
Volume
Sets the volume of the ring tone, which indicates that an incoming
call is a telephone call through the internal speaker when Receive
Mode is set to Telephone/Fax.
Auto Receive
Fax
Sets the interval at which the printer goes into the fax receive mode
after answering an incoming call.
Auto Receive
Tel/Fax
Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call.
Auto Receive
Answer/Fax
Sets the interval at which the printer goes into the fax receive mode
after the external answering machine receives an incoming call.
Junk Fax Setup Sets whether to reject unwanted faxes by accepting only the faxes
from the numbers registered in the Phone Book.
2 Sided Printing Sets whether to print on both sides of a sheet of paper.
Remote Receive Sets whether to receive a fax by pressing a remote receive code on
the external telephone.
Remote Receive
Tone
Sets a 2-digit remote receive code when Remote Receive is On.
Discard Size Sets whether to delete text or images at the bottom of a fax page
when the entire page does not fit onto the output paper. Selecting
Auto Reduction automatically reduces the fax page to fit it onto the
output paper, and does not discard any images or text at the bottom
of the page.
Received Fax
Forward
Sets your printer to forward incoming faxes to another fax number, to
e-mail addresses, or to a server.
Forwarding
Number
Allows you to enter the fax number of the destination to which
incoming faxes are forwarded.
Forwarding
E-mail Address 1
Allows you to enter the e-mail address to which incoming faxes are to
be forwarded.
Forwarding
E-mail Address 2