User's Manual

Dell™ Printer Configuration Web Tool | 149
*1
This is available on Dell H625cdw and Dell H825cdw.
*2
This setting does not affect fax job.
Network Settings
Specifies the PostScript Level3 Compatible communication protocol for the printer.
USB Settings
Specifies USB settings of the printer.
PCL Settings
Specifies the Printer Control Language (PCL) settings.
Resume Printing After Jam
Recovery
*2
Sets whether to delete print job after recovering from paper jam.
Tap To Print Sets whether to add the printer to a mobile device such as a tablet or
a notebook computer by tapping the device to the (NFC)
reader.
PS Data Format Sets PostScript Level3 Compatible communication protocol for each
interface.
USB Port Sets whether to enable the USB interface on the printer.
PS Data Format Sets PostScript Level3 Compatible communication protocol for each
interface.
Job Time-out Sets the amount of time the printer waits for data to arrive from the
computer.
Paper Tray Sets the paper input tray.
Paper Size Sets the paper size.
Custom Paper Size - Y Sets the length of custom size paper.
Custom Paper Size - X Sets the width of custom size paper.
Orientation Sets how text and graphics are oriented on the page.
2 Sided Print Sets duplex setting as the default for all print jobs.
Font Sets the font from the list of registered fonts.
Symbol Set Sets a symbol set for the specified font.
Font Size Sets the font size for scalable typographic fonts.
Font Pitch Sets the font pitch for scalable mono spaced fonts.
Form Line Sets the number of lines in a page.
Quantity Sets the number of copies to print.
Image Enhance Sets whether to enable the Image Enhancement feature.
Hex Dump Sets whether to help isolate the source of a print job problem. With
Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not
executed.
Draft Mode Sets whether to print in the draft mode.
Line Termination Sets how to handle line terminations.
Default Color Sets the print color mode as Color or Black. This setting is used for
print jobs without a specified color print mode.
Ignore Form Feed Sets whether to ignore blank pages that only contain Form Feed
control codes.