User's Manual

122 | Understanding the System Menus
❚ Default Settings >
Direct Print Defaults/USB Direct Print Defaults
Modifies the defaults for the Direct Print Defaults/USB Direct Print
Defaults menu. See "Print PDF/TIFF.”
NOTE:
• For Dell H625cdw and Dell H825cdw, Direct Print Defaults is displayed. For Dell S2825cdn,
USB Direct Print Defaults is displayed.
Tray Management
Use the Tray Management menu to define the print media loaded in tray1 and the
optional 550-sheet feeder.
To display the Tray Management menu, press the (Information) button, and then
tap the Tools tab.
❚ Tray Management >
Tray Settings
Configures tray settings.
❚ Tray Management > Tray Settings >
MPF
Specifies the paper loaded in the Multipurpose Feeder (MPF).
❚ Tray Management > Tray Settings >
Tray1
Specifies the paper loaded in tray1.
NOTE:
• For details about supported paper sizes, see "Supported Print Media.”
Display Tray
Prompt
Select the checkbox to display a popup message that prompts to set
paper type and paper size when paper is loaded in the MPF. The
factory default is on (selected).
MPF Mode Use Panel
Settings
Uses the paper size and type specified on the operator panel.
Use Printer
Driver Settings
Uses the paper size and type specified on the print driver.
Manual When the print job is started, the printer pauses the job and shows the
screen to prompt the user to load the paper of the specified size and
type. To continue the job, check that the specified paper is loaded,
and then tap Continue in the screen on the touch panel.
Size Specifies the paper size.
Type Specifies the paper type.
Display Tray Prompt Select the checkbox to display a popup message that prompts to set
Paper Type and Paper Size when paper is loaded in tray1. The factory
default is on (selected).
Size Specifies the paper size.
Type Specifies the paper type.