User's Manual

Understanding the System Menus | 117
❚ Admin Settings > Maintenance >
Clear Stored Jobs
NOTE:
• The Clear Stored Jobs feature is available only when RAM Disk is set to On.
Clears all files stored as Secure Print, Private Mail Box Print, Public Mail box Print, Proof
Print, and Stored Print in the RAM disk.
❚ Admin Settings > Maintenance >
Non-Dell Toner
Specifies whether to enable the Non-Dell Toner feature, which uses toner cartridge of
another manufacturer.
CAUTION:
• Using a non-Dell™ toner cartridge may severely damage the printer. The warranty does not
cover damages caused by using non-Dell toner cartridges.
❚ Admin Settings > Maintenance >
Adjust Altitude
Specifies the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric
pressure. Adjustments are performed by specifying the altitude of the location where the
printer is being used.
NOTE:
• An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of
remaining toner, etc.
❚ Admin Settings > Maintenance >
Decrease Ghosting
Reduces negative ghost.
❚ Admin Settings > Maintenance >
Clear Job History
Clears the job history of all finished jobs.
❚ Admin Settings > Maintenance >
Fax Line Test
NOTE:
• The Fax Line Test feature is not available when the Fax function is disabled.
Tests if the voltage supply from the fax line is sufficient.
❚ Admin Settings >
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This
All Deletes all files stored as Secure Print, Private Mail Box Print, Public
Mail Box Print, and Proof Print in the RAM disk.
Secure Document Deletes all files stored as Secure Print in the RAM disk.
Stored Document Deletes all files stored as Stored Print in the RAM disk.