User's Manual

116 | Understanding the System Menus
❚ Admin Settings > Maintenance >
Adjust 2nd BTR
NOTE:
• The print quality changes depending on the setting values you select for this item.
Specifies the transfer roller voltage adjustment for each paper type. If you see mottles on
the print output, try to increase the voltage. If you see white spots on the print output, try
to decrease the voltage.
❚ Admin Settings > Maintenance >
Adjust Fusing Unit
NOTE:
• The print quality changes depending on the setting values you select for this item.
Adjusts the temperature setting of the fusing unit for each paper type. When the
printouts are curled, try to lower the temperature. When the toner does not fuse on the
paper properly, try to increase the temperature.
❚ Admin Settings > Maintenance >
Color Reg Adjust
❚ Admin Settings > Maintenance >
Clean Developer
Stirs the developer in the drum cartridge.
❚ Admin Settings > Maintenance >
Toner Refresh
Cleans the toner in the drum cartridge.
NOTE:
• The Toner Refresh feature uses the toner, and shorten the life of the toner cartridge and the drum
cartridge.
❚ Admin Settings > Maintenance >
Reset Defaults
Initializes the non-volatile (NV) memory. After executing this setting and restarting the
printer, all the menu parameters are reset to their default values.
❚ Admin Settings > Maintenance >
Initialize Print Meter
Initializes the print meter of the printer. When the print meter is initialized, the meter
count is reset to zero.
Auto Correct Automatically performs color registration correction.
User Fax Section Initializes the fax number entries in the Address Book.
User Scan Section Initializes the e-mail and server address entries in the Address Book.
User Account Section Initializes the user registration information.
User App Section Initializes the widget application information.
System Section Initializes the system parameters.