User's Manual

Understanding the System Menus | 115
❚ Admin Settings > System Settings >
Non Registered User
Specifies whether to enable the Non Registered User feature, which permits the printing
of data without authentication information.
❚ Admin Settings > System Settings >
Auto Color To Mono Print
NOTE:
• The Auto Color To Mono Print feature is available when Dell ColorTrack is disabled.
Specifies whether to enable the Auto Color To Mono Print feature, which prints all print
jobs in black and white even when color print is specified.
❚ Admin Settings > System Settings >
ColorTrack Error Report
Specifies whether to enable the ColorTrack Error Report feature, which prints
error-related information if printing with ColorTrack results in an error.
❚ Admin Settings > System Settings >
NFC - Tap to Print
Specifies whether to add the printer to a mobile device such as a tablet or a notebook
computer by tapping the device to the (NFC) reader.
NOTE:
• This is available on Dell H625cdw and Dell H825cdw.
❚ Admin Settings > System Settings >
Calibration
Specifies tray to calibrate the machine regularly. This feature corrects consistency of
printing colors over time, environment and print media.
❚ Admin Settings >
Maintenance
Use the Maintenance menu to initialize the non-volatile (NV) memory, configure the
plain paper quality adjustment settings, and configure the security settings.
❚ Admin Settings > Maintenance >
Paper Density
Specifies paper density settings.
❚ Admin Settings > Maintenance >
Adjust Transfer Belt Unit
Adjusts the transfer bias when the faint image of the previous page, a part of the page
currently printing, etc. appear on the output.
K Offset If faint black colored ghosts appear, try to decrease the value.
YMC Offset If faint ghosts in color (yellow, magenta, or cyan) appear, try to
decrease the value.