User's Manual

114 | Understanding the System Menus
❚ Admin Settings > System Settings > Output Settings >
Report 2 Sided Print
Specifies whether to print reports on one side or both sides of a sheet of print media.
❚ Admin Settings > System Settings > Output Settings >
Use Another Tray
Specifies whether to enable the Use Another Tray feature, which changes to another
paper tray when paper runs out in the specified paper tray.
NOTE:
• The size of image to print is not adjusted automatically. If you select another paper tray with paper
size smaller than the paper size specified in the job, the parts that are larger than the print media
are not printed.
❚ Admin Settings > System Settings > Output Settings >
Resume Printing After Jam Recovery
Specifies whether to enable the Resume Printing After Jam Recovery feature. This
feature deletes print job after recovering from paper jam.
❚ Admin Settings > System Settings >
Set Available Time
Sets the available time for the Copy, Scan, Fax, and Print functions.
NOTE:
• Set Available Time can be configured when Print, Copy, Scan, or Fax is set to On.
❚ Admin Settings > System Settings >
Secure Job Expiration
NOTE:
• Secure Job Expiration feature is available only when RAM Disk is set to On.
Specifies the date and time to delete the files stored as Secure Print in the RAM disk.
❚ Admin Settings > System Settings >
ColorTrack Mode
Specifies whether to enable the ColorTrack Mode feature, which limits access to color
printing.
Copy/Scan/Fax/
Print
Set Available
Time
Specifies whether to set the time when function is available.
Start Time
End Time
Recurrence Sets the day of the week to repeat the setting.
Expiration Mode Sets whether to enable or disable the Secure Job Expiration feature.
Expiration Time Sets the time to delete the files stored as Secure Print in the RAM disk.
Recurrence Sets the recurrence to delete the files stored as Secure Print in the
RAM disk.
Weekly Setting Sets the day of the week to delete the files stored as Secure Print in
the RAM disk.
Monthly Setting Sets the day of the month to delete the files stored as Secure Print in
the RAM disk.