User's Manual

Understanding the System Menus | 111
*
This is available on Dell H625cdw and Dell H825cdw.
❚ Admin Settings > System Settings > General >
Low Toner Alert Message
Specifies whether to enable the Low Toner Alert Message feature, which shows the alert
message when the toner is low.
❚ Admin Settings > System Settings > General >
OffHook Wake Up
Specifies whether to enable the OffHook Wake Up feature, which wakes up from the
Sleep or Deep Sleep mode when you pick up the handset of the external telephone.
❚ Admin Settings > System Settings > General >
Auto Log Print
Specifies whether to enable the Auto Log Print feature, which automatically prints a job
history report after every 20 jobs.
Print logs can also be printed using the Report / List menu.
❚ Admin Settings > System Settings > General >
RAM Disk
Specifies whether to enable the RAM Disk feature, which allocates memory to the RAM
disk file system for the Secure Print, Private MailBox Print, Public Mail Box Print, and
Proof Print features. The change becomes effective after the printer is turned off and
then on again.
NOTE:
• Turn off the printer, and then turn it on again to apply the settings for the RAM Disk menu.
❚ Admin Settings > System Settings > General >
Fax Server Phone Book
Specifies whether to enable the Fax Server Phone Book feature, which searches the
Control Panel Selects the volume for a tone when the operator panel input is
correct.
Invalid Key Selects the volume for a tone when the operator panel input is
incorrect.
Machine Ready Selects the volume for a tone when the printer is ready to process a
job.
Copy Completed Selects the volume for a tone when a copy job is complete.
Job Completed Selects the volume for a tone when a job other than a copy job is
complete.
Fault Tone Selects the volume for a tone when a job ends abnormally.
Alert Tone Selects the volume for a tone when a problem occurs.
Out of Paper Selects the volume for a tone when the printer runs out of paper.
Low Toner Alert Selects the volume for a tone when a toner is low.
Auto Clear Alert Selects the volume for a tone 5 seconds before the printer performs
auto clear.
NFC Authentication
*
Selects the volume for a tone when an NFC card is placed on the NFC
reader for authentication.
All Tones Selects the volume for all the alert tones.