User's Manual

Understanding the System Menus | 109
❚ Admin Settings > Fax Settings >
Fax Reports
Configures settings for fax reports.
❚ Admin Settings > Fax Settings > Fax Reports >
Fax Activity
Sets whether to automatically print a fax activity report after every 50 incoming and
outgoing fax communications.
❚ Admin Settings > Fax Settings > Fax Reports >
Fax Transmit
Sets whether to print a transmission result after a fax transmission.
❚ Admin Settings > Fax Settings > Fax Reports >
Fax Broadcast
Sets whether to print a transmission result after a fax transmission to multiple
destinations.
❚ Admin Settings > Fax Settings > Fax Reports >
Fax Protocol
Sets whether to print the protocol monitor report, which helps you identify the cause of
a communication problem.
❚ Admin Settings >
System Settings
Use System Settings to configure the power saving mode, warning tones, time-out
duration, display language, and job log auto print settings.
❚ Admin Settings > System Settings >
General
Configures general settings for the printer.
Auto Print
No Auto Print
Print Always Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Print Always Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission to
multiple destinations.
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints the protocol monitor report only when an error occurs.
Print Disable Does not print the protocol monitor report.