User's Manual
106
| Understanding the System Menus
❚
Admin Settings > Fax Settings > Incoming Defaults >
Ring Tone Volume
Specifies whether to enable the Ring Tone Volume setting. Set the volume of the ring
tone, which indicates that an incoming call is a telephone call through the internal
speaker when Receive Mode is set to Telephone / Fax.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Auto Receive Setup
Configures settings for automatic fax reception.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Junk Fax Setup
Specifies whether to enable the Junk Fax Setup feature, which rejects unwanted faxes by
accepting faxes only from the fax numbers registered in the Phone Book.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Secure Receive
NOTE:
• The Secure Receive feature is available only when Panel Lock Control is set to Enable.
Specifies whether to require a password to print received faxes, and to set or change the
password.
*
This item is available only when Secure Receive Set is set to Enable.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Received Fax Forward
Sets whether to forward incoming faxes to a specified destination.
Ans Machine/Fax This mode is intended for use with an answering machine. When the
answering machine receives the call, the printer monitors the call for
fax tones. When the printer detects fax tones, the printer
automatically receives the fax. When the answering machine is off,
the printer goes into the Fax mode after the ring tone sounds for a
predefined time. If the phone communication in your country is serial,
this mode is not supported.
DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a
separate number for faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring pattern.
Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call.
Auto Receive Tel/Fax Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call.
Auto Receive Ans/Fax Sets the interval at which the printer goes into the fax receive mode
after the external answering machine receives an incoming call.
Secure Receive Set Sets to require a password to print received faxes.
Change Password
*
Sets or changes the four-digit password required to print received
faxes.
Off