User's Manual

Understanding the System Menus |
105
Admin Settings > Fax Settings >
Incoming Defaults
Configures settings for incoming fax.
Admin Settings > Fax Settings > Incoming Defaults >
Receive Mode
Selects the default fax receiving mode.
Pattern1–7 Distinctive Ring Pattern Detection (DRPD) is a service provided by
some telephone companies. DRPD Patterns are specified by your
telephone company. The following shows the patterns provided with
the printer.
Ask your telephone company which pattern you need to select to use
this service. For example, Pattern7 is the New Zealand FaxAbility
distinctive ringing pattern: rings for 400 ms, stops for 800 ms, rings
for 400 ms and stops for 1400 ms. This pattern is repeated over and
over again. This printer only responds to Distinctive Alert cadence(s)
DA4 in New Zealand.
Telephone Automatic fax reception is turned off. You can receive a fax by picking
up the handset of the external telephone and then pressing the
remote receive code, or by tapping Manual Receive in On Hook
and then tapping Receive.
Fax Automatically receives faxes.
Telephone / Fax When the printer receives an incoming fax, the external telephone
rings for the time specified in Auto Receive Tel/Fax, and then the
printer starts receiving the fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that the call is a
telephone call.
Pattern1
Pattern2
Pattern3
Pattern4
Pattern5
Pattern6
Pattern7