User's Manual

88 Installing Printer Drivers on Windows
®
Computers
3 Select Wireless or Ethernet Connection , and then click Next .
4 Select the printer you want to install from the printer list, and then click Next . If the target printer is not displayed
on the list, click the (Refresh) button to refresh the list or click
add printer manually to add a printer to the list
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am setting up this printer on a server check
box.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP
address.
NOTE: In some cases, Windows Security Alert is displayed in this step when you use Windows Vista
®
, Windows Vista
®
64-bit Edition, Windows Server
®
2008, Windows Server
®
2008 64-bit Edition, Windows Server
®
2008 R2, Windows
®
7,
Windows
®
7 64-bit Edition, Windows
®
8, Windows
®
8 64-bit Edition, Windows
®
8.1, Windows
®
8.1 64-bit Edition, Windows
Server
®
2012, and Windows Server
®
2012 R2. In this case, select Unblock (Allow access for Windows Server
®
2008 R2
and Windows
®
7), and then continue the procedure.
5 Specify the printer settings, and then click Next .
a Enter the printer name.
b If you want to set the printer as the default printer, select the Set this printer as default check box.
c If you want to install the PostScript 3 Compatible printer driver, select the PS Driver check box.
If you want to install the Fax Driver, select the
Fax Driver check box.
d If you want other users on the network to access the printer, select Share this printer with other computers on
the network
, and then enter a share name that users can identify.