User's Manual

Loading Print Media

269

Load the envelopes in the short edge feed orientation with the flaps open or closed and the print side up. Ensure

that the flaps come at the bottom with the flaps open or at the top with the flaps closed when you face towards the

printer.

When you print with the orientation of the 1, position of the envelopes may be distorted on the output tray. In this

case, set the orientation of the 2.

Loading Letterhead in the MPF

When you use the MPF, letterhead and hole punched paper must be inserted top edge first with the print side facing

up.

Using the MPF

• Load only one size and type of print media during a single print job.

• To achieve the best possible print quality, use only high-quality print media that is designed for use in laser printer.

For more guidelines on print media, see "Print Media Guidelines."

• Do not add or remove print media when there is still print media in the MPF or when the printer is printing from

the MPF. This may result in a paper jam.

• Print media should be loaded with the recommended print side up and the top of the print media going into the

MPF first.

• Do not place objects on the MPF. Also, avoid pressing down or applying excessive force on it.

• The icons on the MPF show how to load the MPF with paper, and how to turn an envelope for printing.