User's Manual

220 Understanding the Printer Menus
Image Compression
Purpose:
To specify the image compression level.
Va lu e s:
Direct Print Defaults (available on the Dell Cloud Multifunction Printer | H815dw only)
USB Direct Print Defaults (available on the Dell Smart Multifunction Printer | S2815dn only)
Purpose:
To modify the defaults for the Direct Print Defaults or USB Direct Print Defaults menu. See
"Print PDF/TIFF" for more details.
Tray Management
Use the Tray Settings menu to define the print media loaded in tray1 and the optional 550-sheet feeder.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Tray Settings
To configure tray settings.
MPF
Purpose:
To specify the paper loaded in the MPF.
Va lu e s:
High Sets the image compression level to High.
Normal
*
Sets the image compression level to Normal.
Low Sets the image compression level to Low.
Display Tray Prompt Enter a check to display a popup message that
prompts to set Paper Type and Paper Size when paper
is loaded in the MPF. The factory default is on
(check).
MPF Mode Use Panel Settings
*
Uses the paper size and type specified on the operator
panel.
Use Printer Driver Settings Use the paper size and type specified on the printer
driver.
Manual When the print job is started, the printer pauses the
job and shows the screen to prompt the user to load
the paper of the specified size and type. To continue
the job, check that the specified paper is loaded, and
tap
Continue in the screen on the touch panel.