User's Manual

190 Understanding the Printer Menus
Advanced Settings
Purpose:
To specify advanced network settings.
IP Filter
NOTE: IP Filter feature is available only for LPD or Port9100 .
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses. The change becomes effective after the printer is turned off and then on again.
Va lu e s:
IEEE 802.1x
NOTE: IEEE 802.1x feature is available only when the printer is connected using Ethernet cable and it is available only when the
IEEE 802.1x authentication is enabled.
Purpose:
To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then on
again.
Bonjour(mDNS) Disable Disables Bonjour (mDNS).
Enable
*
Enables Bonjour (mDNS).
Telnet Disable Disables Telnet.
Enable
*
Enables Telnet.
Update Address Book Disable Disables Update Address Book.
Enable
*
Enables Update Address Book.
HTTP-SSL/TLS Disable
*
Disables HTTP-SSL/TLS.
Enable Enables HTTP-SSL/TLS.
Google Cloud Print Disable Disables Google Cloud Print.
Enable
*
Enables Google Cloud Print.
Print from Dell Document
Hub
*1
Disable Disables Print from Dell Document Hub.
Enable
*
Enables Print from Dell Document Hub.
Scan to Dell Document
Hub
*1
Disable Disables Scan to Dell Document Hub.
Enable
*
Enables Scan to Dell Document Hub.
*1
This item is available only on the Dell Cloud Multifunction Printer | H815dw.
n (n is 1-5) IP Address Sets the IP address for Filter n.
Subnet Mask Sets the address mask for Filter n.
Mode Off
*
Disables the IP Filter feature for Filter n.
Accept Accepts an access from the specified IP address.
Reject Rejects an access from the specified IP address.