User's Manual

142 Dell™ Printer Configuration Web Tool
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Va lu e s:
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Storage
NOTE: Storage feature is available only when RAM Disk is enabled.
Purpose:
To clear all files stored in the RAM disk.
Va lu e s:
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
WARNING: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Reset Defaults Reset Defaults User Fax Section and
restart printer.
Click Start to reset the fax number entries in the Address
Book.
Reset Defaults User Scan Section
and restart printer.
Click Start to reset the e-mail and server address entries
in the Address Book.
Reset Defaults User Account
Section and restart printer.*
1
Click Start to reset the user account entries.
Reset Defaults User App Section
and restart printer*
1
Click Start to reset the user application entries.
Reset Defaults System Section and
restart printer.
Click Start to reset the system parameters.
Power On Wizard Power On Wizard Click Start to perform the initial setup for the printer.
*1
This item is available on the Dell Cloud Multifunction Printer | H815dw only.
Clear Storage*
1
All Clear Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the RAM disk.
Secure Document Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the RAM disk.
Stored Document Click Start to clear all files stored in the RAM disk.
*1
This item is available only when RAM Disk is enabled.