User's Manual

Dell™ Printer Configuration Web Tool 141
Adjust Density
Purpose:
To adjust the density level.
Va lu e s:
Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Va lu e s:
Clean Developer
Purpose:
To stir the developer in the drum cartridge.
Va lu e s:
Clean Transfer Unit
Purpose:
To clean the transfer unit.
Va lu e s:
Label Sets the temperature settings for the fusing unit for labels within the range of -3 to 3.
Envelope Sets the temperature settings for the fusing unit for envelopes within the range of -3 to 3.
Japanese Postcard Sets the temperature settings for the fusing unit for Japanese postcards within the range of -3 to 3.
Darker3
Darker2
Darker1
Adjusts the density level darker than the normal setting.
Normal Works well with standard typed or printed documents.
Lighter1
Lighter2
Lighter3
Adjusts the density level lighter than the normal setting.
Pitch Chart Print Prints a full halftone page. Also prints a page to check the pitch. A total of two
pages are printed.
Full Page Solid Print Prints a chart of the full page solid.
1-Sided Prints a chart on one side of the paper.
2-Sided Prints a chart of the full page solid on both sides of the paper.
Alignment Chart Print Prints a chart to check for proper alignment of the print image on the paper.
Clean Developer Start Stirs the developer in the drum cartridge.
Toner Refresh Start Expels the toner in the drum cartridge, and supplies the fresh toner from the
toner cartridge.
Clean Transfer Unit Start Cleans the transfer unit.