User's Manual

116 Operator Panel
When Using the Operator Panel
1 Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Language Settings .
3 Ta p Panel Language .
4 Tap until the desired language appears, and then tap the desired language.
5 Ta p OK .
When Using the Tool Box
1 Click Start  All Programs  Dell Printers  Dell Cloud Multifunction Printer - H815dw or Dell Smart
Multifunction Printer - S2815dn
 Tool Box .
The
Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Panel Language from the list at the left side of the page.
The
Panel Language page appears.
4 Select the desired language from Panel Language , and then click Apply New Settings .
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time.
NOTE: If Panel Lock Control is set to Enable , you need to enter the four-digit password to enter the Admin
Settings
menu.
To set the power saver timer:
1
Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Admin Settings .
3 Ta p System Settings .
4 Ta p General .
5 Ta p Power Saver Timer .
6 Ta p Sleep or Deep Sleep .
7 Tap – or +, or use the number pad to enter the desired value.
You can specify from 1 to 60 minutes for
Sleep or 1 to 60 minutes for Deep Sleep .
8 Ta p OK .
About the Concurrent Jobs Feature
This feature enables you to start a concurrent job while a fax job is running. This is done by temporarily displaying
the Home screen and switching to a different function that can be run concurrently such as copy or scan.
1
While the printer is sending or receiving a fax, press the ( Home ) button.
2 Ta p Copy or Scan .
3 After setting the copy or scan settings, tap OK .
For details about
Copy or Scan , see "Copying" or "Scanning."