User's Manual

Scanning 331
Setting the DNS Server Address
To set the DNS server address to your printer, follow the steps below:
1
Launch the Dell Printer Configuration Web Tool .
a Open the web browser.
b Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Click Print Server Settings .
3 Click TCP/IP .
4 If you are using DHCP for TCP/IP setting for the printer:
Set
Get DNS Server Address from DHCP to Enable .
If you are setting TCP/IP manually:
Set
Manual DNS Server Address .
5 Click Apply New Settings .
Setting the Information Necessary to Access the Mail Server
To make the printer to send an e-mail, follow the steps below:
1
Launch the Dell Printer Configuration Web Tool .
a Open the web browser.
b Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Click E-Mail Server Settings Overview .
3 Set the mail server information under E-Mail Server .
NOTE: In this procedure, the server settings for a Gmail account are used as an example. The server settings will differ for
each e-mail service.
NOTE: Information about the Gmail account is based on the information as of October 2013. For the latest information, visit
the homepage of Gmail.
a
In the Primary SMTP Gateway text box, set the primary SMTP gateway.
For example:
smtp.gmail.com