User's Manual

310 Scanning
Scanning From the Operator Panel - Scan to WSD
If the printer is connected to a computer via network using Web Services on Devices (WSD), you can use the Scan
to Web Services on Devices (WSD) function to send scanned images to a computer.
NOTE: To use Scan to Web Services on Devices (WSD), you need to setup connection using Web Services on Devices (WSD).
NOTE: Web Services on Devices (WSD) are supported only on Windows Vista
®
, Windows
®
7, Windows
®
8, and Windows
®
8.1.
Ensure that the scanner driver is installed on your computer. See "Setting Up the Printer Using Dell Printer Easy Install
(Windows
®
Only)" for details.
Printer Setup for Scan to Web Services on Devices (WSD)
Setup the printer and computer for connection using Web Services on Devices (WSD).
Checking the Printer Setting
To use the Scan to Web Services on Devices (WSD) function, the Scan to WSD function needs to be enabled from
the operator panel of the printer or on the Dell Printer Configuration Web Tool. See "Port Settings" or "Protocols"
for details.
Setting Up the Computer
NOTE: For Windows
®
8 and Windows
®
8.1, the computer automatically connects the printer using Web Services on Devices
(WSD). There is no need to install the printer manually.
For Windows
®
7:
1 Click Start  Computer  Network
2 Find the printer you want to use, right-click the icon for the printer, and then click Install . The printer is
connected using Web Services on Devices (WSD).
3 Right-click the icon for the printer, and then click Scan profiles . Specify the various settings of the profile,
including the
Source where the documents are loaded.
For Windows Vista
®
:
1 Click Start  Network
2 Right-click the icon for the printer, and then click Install .
3 Click Continue . The printer is connected using Web Services on Devices (WSD).
Scanning and Sending Images to the Computer Using Web Services on Devices (WSD)
1 Load the document(s) facing up with top edge in first into the DADF.
OR
Place a single document facing down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the ( Home ) button.
3 Ta p Scan to WSD .
NOTE: Whether to scan from the DADF or from the document glass can be specified in the scan profile. Make sure to specify
the scan profile accordingly if you want to scan the document from the DADF.