User's Manual

292 Printing
Enabling Tap to Print on the Printer Menu
1 Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Admin Settings .
3 Ta p System Settings .
4 Ta p u nt i l NFC - Tap to Print appears, and then tap NFC - Tap to Print .
5 Ta p Enable .
6 Ta p OK .
7 Turn off the printer, and turn it on again to apply the settings.
Enabling Tap to Print on the Dell Printer Configuration Web Tool
1 Launch the Dell Printer Configuration Web Tool by entering IP address of the printer in your web browser. For
more information, see "Setting Up the Dell Printer Configuration Web Tool" and "Starting the Dell Printer
Configuration Web Tool."
2 When the Dell Printer Configuration Web Tool opens, select Printer Settings .
3 Click the System Settings tab.
4 Check the Enable check box for Tap To Pr int .
5 Click Apply New Settings .
Adding the Printer to the Mobile Device
While the printer is connected to the same subnet of the network with the mobile device, it is possible to add the
printer to the mobile device by tapping the mobile device onto the printer. The printer is added as a WSD (Web
Services on Devices) printer.
NOTE: Make sure that the NFC function is activated on the mobile device.
1 Locate the NFC reader of the mobile device.
2 Tap the mobile device onto the printer to start adding the printer to the mobile device.
The printer beeps when it detects a tapping mobile device.
3 When the following message appears in the top right corner of the mobile device screen, tap the message window
to start setting up the printer on the mobile device.
Add a device?
Tap to set up your Dell-H815dw-xxxxxx.