User's Manual

318 Printing
9 Ta p Connection Status .
10 Ensure no device is connected with the Wi-Fi Direct connection.
NOTE: When other device is connected (1 is displayed on Connection Status), you cannot use the Wi-Fi Direct
connection. Disconnect the other device from the Wi-Fi Direct network. See "Disconnecting Wi-Fi Direct Network."
11 Install the printer on the mobile device.
The following procedure uses a Wi-Fi Direct certified device running Windows RT as an example.
a Ta p Devices in the PC settings menu.
b Ta p Add a device in the Devices sub-menu.
c Tap the printer name (factory default: Dell C2665dnf_xxxxxx ).
The popup dialog box is displayed on the operator panel.
12 Ta p Yes to accept pairing request from the Wi-Fi certified device.
When a PIN is displayed on the operator panel, enter the PIN on the Wi-Fi certified device. Tap
OK to accept
pairing request from the Wi-Fi certified device.
The printer is paired with the device and ready for use.
For Devices That Are Not Wi-Fi Direct Certified
Setting Up the Printer
1 Press the ( Information ) button.
2 Tap the Tools tab, and then tap Admin Settings .
3 Ta p Network .
4 Ta p Wi-Fi Direct .
5 Ta p Wi-Fi Direct .
6 Ta p Enable , and then tap OK .
When a popup message about the devices that are not Wi-Fi Direct certified is displayed, tap
Close .
7 Ta p Group Role .
8 Ta p Group Owner , and then tap OK .
9 Ta p Connection Status .
10 Ensure no device is connected with the Wi-Fi Direct connection.
NOTE: When other device is connected (1 is displayed on Connection Status), you cannot use the Wi-Fi Direct
connection. Disconnect the other device from the Wi-Fi Direct network. See "Disconnecting Wi-Fi Direct Network."
11 The printer must be rebooted after you set Wi-Fi Direct . After the reboot, repeat steps from 1 to 4.
12 Tap until SSID and Passphrase appears, and tap each menu to check what the SSID and passphrase is.
NOTE: To confirm the printer's SSID and passphrase, you can also print the list by tapping Print Passphrase
under the
Passphrase menu.
Setting Up the Mobile Device
1 Connect the mobile device to the Wi-Fi Direct network.
For Windows 8, Windows RT
a Ta p Settings in the PC settings menu.
b Tap the Wi-Fi icon.
c Tap the printer's SSID, and then tap Connect .