User's Manual

Understanding the Tool Box Menus 211
Environment Sensor Info
Purpose:
To print the internal environment sensor information of the printer to Result.
Va lu e s:
Resetting Defaults
After executing this function and rebooting the printer, the phone book, address book, or menu parameters are reset
to their default values.
The following menu parameters are exceptions and are not reset.
• Network settings
• Panel Lock settings and password
• Function Enabled settings (Copy, Scan to E-mail, Fax, Scan to Network, Scan to PC, PC Scan, Scan to USB, USB
Direct Print) and passwords
• Secure Receive settings and password
• Login Error settings
• Set Available Time settings
• Secure Job Expiration settings
• USB Port settings
• ColorTrack Mode settings
• ColorTrack Error Report settings
• Non Registered User settings
When Using the Tool Box
1 Click Starto All Programso Dell Printerso Dell C2665dnf Color Laser Multifunction Printero Tool Bo x.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Service Tools from the list at the left side of the page.
The Service Tools page appears.
4 Click User Fax Section, User Scan Section, or System Section.
The printer restarts automatically to apply the settings.
Alignment Chart Prints a chart to check for proper alignment of the print image on the paper. One
page is printed.
Get Environment Sensor
Info
Click this button to confirm the internal environment sensor information of the printer such as
temperature and humidity.