Instruction Manual

72
Collection of Recorded Data
Transfer the data recorded in the pre-amplifier
to the main unit.
Correlation of the transferred data can be done
using the Correlation function (correlation from
recorded data).
For details on the correlation function, see
"Playback and Correlation of Recorded Data"
under "4-7 Explanation of Equipment Settings
and Operations" on p. 53.
① Turn on the pre-amplifiers.
② Turn on the main unit.
③ Verify that the pre-amplifier icons are lit.
④ Check the battery level and date and time of
the main unit and pre-amplifiers.
To change the date and time, see “3-6 Date
and Time Adjustment” on p. 25.
⑤ Press the menu switch .
⑥ Tap Logger-data collection.
⑦ The list of recorded data is displayed.
Specify the file number for saving the data
and tap Start.
If you do not specify a number for saving the
data, it will be saved in the next available file
number.
⑧ A confirmation message is displayed. Tap
OK to start collecting the recorded data.
No matter how many pre-amplifiers (1-4) are
used, it takes 5 minutes to record 5 minutes.
If you fail to read the recorded data after
several attempts, connect the SDHC card to
your computer to scan and repair the files.