Instruction Manual

41
4−7 Explanation of Equipment Settings and Operations
Adding or Changing Pipe Conditions
To add or change the pipe type (material), diameter,
or length, tap the corresponding box and enter the
value.
Select a material.
For the list of materials, see "6-1 Pipe Data Handling
(Main Unit)" on p. 74.
Tap “Delete” to delete the information.
When a row of data is deleted, the rows below it are
shifted upwards.
Select a diameter.
For the list of diameters, see "6-1 Pipe Data
Handling (Main Unit)" on p. 73.
Enter the length from the numeric keypad screen.
When you are done, click × to close the Setting
piping conditions screen.
[Tip]
If you have no data (pipe type or pipe diameter) for the pipe to be investigated, see “6-8 Manual
Calculation of Sound Velocity" on p. 85.
<Setting piping conditions>