Instruction Manual

38
4−7 Explanation of Equipment Settings and Operations
Setting the Recording Start Time
This setting configures the recording start time in
logger mode.
It can be set within a 24-hour range.
Tap the value for Start time and then set the value in
the 24-hour display.
You cannot tap this unless the Logger mode is
selected as the Mode.
Filter Settings
The logger has two filters available: Common and
Through. The default setting is Common.
Tap Common to change it to Through.
Select a filter.
Setting the Sensitivity
The sensitivity can be set manually and
automatically.
Enter a value in 00 if you want to set it manually.
If you want to set it automatically, tap Auto-sens.
Once the setting is complete, it shows the sensitivity
that was set.
<Pre-amplifier setting>