Instruction Manual

37
Explanation of Equipment Settings and Operations
<Pre-amplifier setting>
Press the pre-amplifier switch .
Tap the icon of the pre-amplifier to be configured.
Alternatively, tap the "All" tab to simultaneously
configure a group of common settings (operation
mode, recording start time, filter, sensitivity, GPS).
The All tab shows only settings that match all the
pre-amplifiers.
Changing the Operation Mode
The pre-amplifiers function as radio relays.
They can also be used in logger mode.
Tap the pre-amplifier number tab and then tap the
mode box.
The following modes can be selected on the
Pre-amplifier operation mode setting screen.
● Pre-amplifier (normal correlation mode)
● Relay
● Pre-amplifier + Relay
● Logger mode
In the All screen, only Pre-amplifier and Logger
mode are available.
<Pre-amplifier setting>