Instruction Manual

32
Preparations
(1) Radio mode preparations
● Insert the rechargeable battery into the main unit.
● Attach the antenna to the main unit and
pre-amplifier.
● Turn on the main unit and the pre-amplifiers.
(2) Cable mode preparations
(cable reel and connecting cable are sold
separately)
● Insert the rechargeable battery into the main unit.
● Attach the antenna to the main unit and
pre-amplifier.
● Extend the cable from the cable reel to the
location of each pre-amplifier.
● Screw the cable plug into the pre-amplifier.
● Use the connecting cable to connect the main
unit and the cable reel.
* When connecting the pre-amplifiers, do not
mix up which is which.
● Turn on the main unit and the pre-amplifiers.
Note:
● Verify that the icon shown below appears on the
screen when you turn on the main unit.
: Cable mode icon
● After unspooling the cable from the cable reel,
plug it into the main unit. Do not connect the
cable to the main unit first, or the connecting
cable may be twisted and damaged when it is
unspooled from the reel.
Leak location
Pipe length
Leak location
(1) Radio mode preparations
(2) Cable mode preparations