User's Manual

4
TWS pairing
CAUTION:
• The protective rubber tab, covering the DC IN and AUX IN ports,
must be firmly in place before immersing the speaker in water or
permanent damage may occur.
• Do NOT immerse while charging.
•
Never connect a cable to any of these connectors if they are wet,
or are at risk of getting wet.
Floats
The speaker naturally floats on the surface of the water.
Support
• Visit Fugoo's Support page at support.fugoo.com for help with
connecting, to view our FAQs or to ask us a question.
• Visit Fugoo's downloads page at fugoo.com/product-support, for
firmware updates, alternative voice prompts, and mobile
wallpaper images.
• Send us a support request at [e-mail].
IPX7 (waterproof)
AUX IN (3.5 mm audio cable)
This speaker has protection against water to a max depth of 3
feet (1 meter) for up to 30 minutes.
1 Pair speaker to a Bluetooth audio device (transmitter).
2 Power On a second SYNC capatible speaker (receiver)
Do NOT pair to Bluetooth device.
• If BT (receiver) device is connected, long press button
(3 seconds) to enter TWS pairing.
3 Hold button of the bluetooth paired speaker for 2 seconds.
• While TWS pairing
The LED on the transmitting devices will flashes blue alternately,
searching for a TWS compatible device to connect to.
• TWS Successful
Transmitting LED: Blue
Receiving LED: Amber
Plugging in a 3.5 mm audio cable into the AUX IN input will
disable the Bluetooth function and will switch the audio signle to
the AUX IN audio mode.