Display Cabinet Version:10/08/2022 1/23
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 55 5 x 40 mm Ex5 9 x 45 mm Jx6 Bx8 C x 55 14 x 10 mm 8 x 30 mm Fx8 Gx4 8 x 20 mm Kx4 7 x 21 mm 3/23 D x 20 5 x 20 mm Hx1
1 11 12 11 7 2 6 12 11 9 3 4 6 9 8 10 16 19 20 16 13 14 15 21 5 17 17 19 22 26 24 23 x2 4/23 25 x4
A x 10 1 5 x 40 mm A Insert quickfit screw(A) into corresponding holes in No.2 and No.3 plate with a screwdriver as shown. A A A 2 A A A A A A A 3 Cx4 2 14 x 10 mm C 2 Attach No.3 plate to No.2, turn cam lock(C) in No.2 plate clockwise to tighten as shown.
A x 10 3 5 x 40 mm Insert quickfit screw(A) into corresponding holes in No.4 and No.5 plate with a screwdriver as shown. A A A A A A A A 4 A A A 5 4 Cx4 14 x 10 mm C Attach No.5 plate to No.4, turn cam lock(C) in No.4 plate clockwise to tighten as shown.
Ax8 5 5 x 40 mm Insert quickfit screw(A) into No.6 plate with a screwdriver as shown. A A A 6 A x2 A Cx8 6 14 x 10 mm Attach No.6 plate to No.9, turn cam lock(C) in No.9 plate clockwise to tighten as shown.
7 Ax8 5 x 40 mm Insert quickfit screw(A) into corresponding holes in No.8 and No.10 plate as shown.
8 Cx6 Bx4 8 x 30 mm Fx4 8 x 20 mm 14 x 10 mm Attach No.7,No.6 and No.8 plate to No.3 using wooden dowel(B). Attach No.9 and No.10 plate to No.2 using wooden dowel(F). Just insert cam lock(C) into No.9 and No.10 plate at first.
9 Cx6 Bx4 8 x 30 mm Fx4 8 x 20 mm 14 x 10 mm Attach No.5 to No.7,No.6 and No.8 plate using wooden dowel(B). Attach No.4 to No.9 and No.10 plate using wooden dowel(F). Insert cam lock(C) into No.9 and No.10 plate, then turn all of them clockwise to tighten as shown.
10 Dx4 Cx2 14 x 10 mm 5 x 20 mm Attach No.12(x2) plate to No.10, turn cam lock(C) in No.12 plate clockwise to tighten as shown. 12 12 C 10 C C 180° Fix No.12 plate to No.9 using screw(D) as shown.
11 Slide No.11 and No.13 plate into available slots as shown.
Ex5 12 9 x 45 mm Fix No.25 leg and No.26 leg support to No.15 plate using screw(E) as shown. 25 25 E 26 E 25 15 E 25 E E E Ax6 13 5 x 40 mm Insert quickfit screw(A) into corresponding holes in No.15 plate as shown.
Cx2 14 x 10 mm C 180° 14 C C 15 Attach No.14 plate to No.15, turn cam lock(C) in No.14 plate clockwise to tighten as shown. 15 Dx8 5 x 20 mm Fix No.16(x2) plate to No.14; fix No.17(x2) plate to No.15 using screw(D) as shown.
Cx6 16 14 x 10 mm Connect the two assembled components, turn cam lock(C) in No.2,4,14 plate clockwise to tighten as shown.
Ax7 17 5 x 40 mm Insert quickfit screw(A) into corresponding holes in No.1 plate as shown.
18 Cx7 14 x 10 mm Cover No.1 plate to the top and turn cam lock(C) in No.2,7,4 plate clockwise to tighten as shown.
19 Dx4 5 x 20 mm Fix No.19(x2) plate to No.15 using screw(D) as shown.
20 Ax8 5 x 40 mm Insert quickfit screw(A) into No.20 plate as shown. A A 20 A A A x2 21 Kx4 Gx4 7 x 21 mm Fix knob(G) to No.20 plate using screw(K) as shown.
22 Dx8 5 x 20 mm Connect No.21 and No.23 plate with No.22 using screw(D) as shown. D D 21 22 23 x2 D D D D 23 Slide No.24 plate into available slots as shown.
24 Cx8 14 x 10 mm Attach No.20 plate to the component and turn cam lock(C) in No.21,23 plate clockwise to tighten as shown.
25 Align rails, slide drawers. 26 Jx6 Reinforce back plate using part(J) as shown.
Hx1 27 Install anti-tipping device(H) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
