Display Cabinet KF020341-02 Version：12/26/2022 1/58
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax76(+3) Bx76(+3) Cx72(+3) Ø6x30mm Ø15x10mm Ø6x35mm Ex4 Fx2 Gx2 Dx18(+2) Ø4x35mm Hx36(+2) Ø20mm Jx8(+1) Lx2 Kx44(+3) K-1 K-2 Ø3x16mm Ux2 Ø4x35mm Wx12 Vx2 Ø4x12mm Mx4 Ø8x18mm Ø6x30mm 3/58 Xx12 Ø6x18mm
Right high cabinet Left high cabinet 42 27 28 28 34 34 33 33 33 30 44 33 32 29 31 32 43 31 31 31 32 32 45 35 38 37 13 37 37 16 12 16 46 38 37 12 11 36 12 12 25 26 47 39 41 41 22 22 22 40 4/58 22 40
1 Ax4 Ø6x35mm Left high cabinet A 12 A A 12 A 12 Insert quickfit screw(A) into corresponding holes in two plate 12 with screwdriver as shown. 2 Cx10 Ø6x30mm Insert wooden dowel(C) into plate 36 and 13 as shown.
3 Bx2 Hx2 Ø15x10mm Ø20mm Attach plate 12 to plate 13, put cam lock(B) into holes in plate 13 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 13 as shown. 13 H 13 B 12 12 B 13 H 180° 13 12 ! 12 4 Bx2 Hx2 Ø15x10mm Ø20mm Attach another plate 12 to plate 36, put cam lock(B) into holes in plate 36 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 36 as shown.
5 Ax8 Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 39 as shown. A A A A A 39 A 6 A A 39 Dx4 Ø4x35mm Attach the two components to plate 39,then fix using screw(D)as shown.
7 Cx4 Ax4 Ø6x30mm Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 40 and 41 as shown. Insert wooden dowel(C) into two plate 22 as shown. A A C 41 41 40 A A C 22 22 C C 8 Cx2 Bx4 Ø15x10mm Ø6x30mm Connect plate 40 and 41 with plate 22, put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 40 and 41 as shown.
Bx8 Ø15x10mm Attach the component to plate 39,put cam lock(B) into holes in plate 40,41,22 and turn clockwise to tighten as shown.
Connect plate 37 with plastic bar 38 at first. Slide back plate along grooves as shown.
Cx4 Ax14 Ø6x30mm Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 29,30 and two plate 31 as shown. Insert wooden dowel(C) into plate 29 and 30 as shown.
Bx3 Hx3 Cx2 Ø15x10mm Ø6x30mm Ø20mm Attach plate 31 to plate 29, put cam lock(B) into holes in plate 29 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 29 as shown.
Bx3 Ø15x10mm Hx3 Cx2 Ø6x30mm Ø20mm Attach another plate 31 to plate 30, put cam lock(B) into holes in plate 30 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 30 as shown.
Bx4 Cx8 Ø15x10mm Ø6x30mm Insert wooden dowel(C) into two plate 32 as shown. Attach plate 32 to plate 30,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown.
Bx4 Ax4 Mx2 Ø15x10mm Ø6x35mm Ø4x35mm Attach plate 29 to plate 32,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown. Fix plate 28 to plate 27 using screw(M) as shown. Insert quickfit screw(A) into corresponding holes in two 31 plate 27 as shown.
Bx4 Hx4 Ø15x10mm Ø20mm Cover plate 27 to plate 29 and 30, put cam lock(B) into holes in plate 29,30 and turn clockwise to tighten as shown. Stick part(H) to plate 29 and 30 as shown.
Cx4 Ax4 Lx1 Ø6x30mm Ø6x35mm Connect plate 33 with plastic bar 34 at first. Slide back plate along grooves as shown. Insert wooden dowel(C) into plate 29 and 30 as shown. Insert quickfit screw(A) into corresponding holes in plate 35 as shown. Fix part(L) to plate 35 as shown.
Dx4 Ø4x35mm Fix plate 35 to plate 29 and 30 using screw(D) as shown.
Ux1 Ø4x12mm Fix part(U) to plate 27 as shown.
Bx4 Hx4 Ø15x10mm Ø20mm 27 Connect the two components together, put cam lock(B) into holes in plate 36,13 and turn clockwise to tighten as shown. Stick part(H) to plate 36 and 13 as shown.
Kx22 K-1 K-2 Ø3x16mm Reinforce back plate using hardware pack(K) as shown.
Jx4 Insert part(J) into corresponding holes in plate 36 and 13, place shelf 16 in as shown.
Fx1 Ex2 Gx1 Insert part(E) into plate 26 as shown. Fix part(G) and knob(F) to plate 26 as shown.
Assembled the door plate as shown.
25/58
Ax4 Ø6x35mm Right high cabinet A 12 A A 12 A 12 Insert quickfit screw(A) into two plate 12 as shown. 27 Cx10 Ø6x30mm Insert wooden dowel(C) into plate 11 and 46 as shown.
28 Bx2 Hx2 Ø15x10mm Ø20mm Attach plate 12 to plate 46, put cam lock(B) into holes in plate 46 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 46 as shown. 46 H 46 B 12 12 B 46 29 Hx2 Ø15x10mm Ø20mm 46 12 12 Bx2 H 180° ! Attach another plate 12 to plate 11, put cam lock(B) into holes in plate 11 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 11 as shown.
30 Ax8 Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 47 as shown. A A A A 47 31 A A A 47 A Dx4 Ø4x35mm Attach the two components to plate 47 , then fix using screw(D) as shown.
32 Cx4 Ax4 Ø6x30mm Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 40 and 41 as shown. Insert wooden dowel(C) into two plate 22 as shown. A A C 41 41 40 A A C 22 22 C C 33 Cx2 Bx4 Ø15x10mm Ø6x30mm Connect plate 40 and 41 with plate 22, put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 40 and 41 as shown.
34 Bx8 Ø15x10mm Attach the component to plate 47,put cam lock(B) into holes in plate 40,41,22 and turn clockwise to tighten as shown.
35 Connect plate 37 with plastic bar 38 at first. Slide back plate along grooves as shown.
36 Cx4 Ax14 Ø6x30mm Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 43,44 and two plate 31 as shown. Insert wooden dowel(C) into plate 43 and 44 as shown.
37 Bx3 Hx3 Cx2 Ø15x10mm Ø6x30mm Ø20mm Attach plate 31 to plate 43, put cam lock(B) into holes in plate 43 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 43 as shown.
38 Bx3 Ø15x10mm Hx3 Cx2 Ø6x30mm Ø20mm Attach another plate 31 to plate 44, put cam lock(B) into holes in plate 44 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 44 as shown.
39 Bx4 Cx8 Ø15x10mm Ø6x30mm Insert wooden dowel(C) into two plate 32 as shown. Attach plate 32 to plate 44,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown.
40 Bx4 Ax4 Ø15x10mm Ø6x35mm Mx2 Ø4x35mm Attach plate 43 to plate 32,put cam lock(B) into holes in plate 32 and turn clockwise to tighten as shown. Fix plate 28 to plate 42 using screw(M) as shown. Insert quickfit screw(A) into corresponding holes in two 31 plate 42 as shown.
41 Bx4 Hx4 Ø15x10mm Ø20mm Cover plate 42 to plate 43 and 44, put cam lock(B) into holes in plate 43,44 and turn clockwise to tighten as shown. Stick part(H) to plate 43 and 44 as shown.
42 Lx1 Cx4 Ax4 Ø6x30mm Ø6x35mm 34 A 45 33 A A 33 C C C C 43 A 45 45 L 44 Connect plate 33 with plastic bar 34 at first. Slide back plate along grooves as shown. Insert wooden dowel(C) into plate 43 and 44 as shown. Insert quickfit screw(A) into corresponding holes in plate 45 as shown. Fix part(L) to plate 45 as shown.
43 Dx4 Ø4x35mm Fix plate 45 to plate 43 and 44 using screw(D) as shown.
44 Ux1 Ø4x12mm Fix part(U) to plate 42 as shown.
45 Bx4 Hx4 Ø15x10mm Ø20mm 42 44 43 Connect the two components together, put cam lock(B) into holes in plate 11,46 and turn clockwise to tighten as shown. Stick part(H) to plate 11 and 46 as shown.
46 Kx22 K-1 K-2 Ø3x16mm Reinforce back plate using hardware pack(K) as shown.
Jx4 47 Insert part(J) into corresponding holes in plate 11 and 46, place shelf 16 in as shown.
48 Ex2 Fx1 Gx1 Insert part(E) into plate 25 as shown. Fix part(G) and knob(F) to plate 25 as shown.
49 Assembled the door plate as shown.
50 46/58
51 If there are only two high cabinets, please follow the figure below Right high cabinet 42 44 Left high cabinet 43 27 30 29 45 11 35 36 47/58
52 Wx6 Ø8x18mm Xx6 Ø6x18mm Fix them together using hardware pack(W,X) as shown.
53 Dx2 Ø4x35mm Vx2 Ø6x30mm WALL WALL WALL V drilling hole Ø6x30mm x2 x2 x2 Drill holes on wall.Knock part(V) into holes. Fix the cabinet to part(V) on wall through hardware pack(D) as shown.
54 If there are left and right high cabinets, hanging cabinets and TV cabinets, please install them as shown in the figure below.
55 Left high cabinet Right high cabinet 27 42 Take out shelf 16 and 17 from cabinets.
56 Assemble four units together as shown.
57 Wx12 Xx12 Ø8x18mm Ø6x18mm Fix them together using hardware pack(W,X) as shown.
58 Place shelf 16 and 17 in.
59 Please measure the distance between these holes and the distance from the hole center to the bottom.
60 Drill holes on wall.
61 Vx2 Rx3 Ø6x30mm Ø8x40mm Knock part(R) and (V) into holes.
62 Dx2 Sx3 Ø4x35mm Ø5x60mm Fix the cabinet to part(R,V) on wall through hardware pack(S,D) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
