Cupboard KF020341-01 Version：12/26/2022 1/42
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax36(+2) Bx36(+2) Cx54(+3) Ø6x30mm Ø15x10mm Ø6x35mm Ex4 Fx2 Gx2 Dx24(+2) Ø4x35mm Hx36(+2) Ø20mm Jx12(+1) Lx2 Kx18(+1) K-1 K-2 Ø3x16mm Nx2 Mx6 Ø4x35mm Px8 Qx32(+3) Ø3.
Sx3 Ø5x60mm Tx8 Ø3x15mm 4/42
Hanging cabinet 2 1 5 4 7 8 6 3 9 4 TV cabinet 13 10 16 12 15 17 23 24 25 14 23 16 18 11 22 20 12 19 21 26 19 22 5/42
1 Ax4 Ø6x35mm TV cabinet Insert quickfit screw(A) into corresponding holes in two plate 12 with screwdriver as shown. A 12 A A 12 A 2 12 Cx10 Ø6x30mm Insert wooden dowel(C) into plate 11 and 13 as shown.
3 Bx2 Hx2 Ø15x10mm Ø20mm Attach plate 12 to plate 13, put cam lock(B) into holes in plate 13 and turn clockwise to tighten as shown. 13 H 13 B 12 12 B Flip the part, stick part(H) to plate 13 as shown. 13 4 Hx2 Ø15x10mm Ø20mm 13 12 12 Bx2 H 180° ! Attach another plate 12 to plate 11, put cam lock(B) into holes in plate 11 and turn clockwise to tighten as shown. H 11 11 B 12 12 H B 180° 11 11 12 Flip the part, stick part(H) to plate 11 as shown.
5 Ax8 Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 10 as shown. A A A 10 A A A A 10 A 6 Lx2 Fix part(L) to plate 10 as shown.
7 Cx8 Bx4 Ø15x10mm Ø6x30mm Attach the two components to plate 10 with wooden dowel(C),put cam lock(B) into holes in plate 11,13 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 14 and 15 as shown.
8 Bx4 Hx4 Ø15x10mm Ø20mm Attach plate 14 and 15 to plate 10 with wooden dowel(C),put cam lock(B) into holes in plate 14,15 and turn clockwise to tighten as shown. Stick part(H) to plate 11 and 13 as shown.
9 Hx4 Ø20mm Connect plate 23 with plastic bar 24 at first. Slide back plate along grooves as shown. Stick part(H) to plate 14 and 15 as shown.
10 Dx8 Ø4x35mm Cover plate 18 to the top and fix using screw(D) as shown.
11 Kx18 Ax4 K-1 Tx8 K-2 Ø3x16mm Ø6x35mm Ø3x15mm Fix back plate 23 using screw(T) as shown. Reinforce back plate using part(K) as shown. Insert quickfit screw(A) into corresponding holes in plate 18 as shown.
12 Cx4 Ax4 Ø6x35mm Ø6x30mm A Insert quickfit screw(A) into corresponding holes in plate 20 and 21 as shown. Insert wooden dowel(C) into two plate 22 as shown. A 20 21 C 22 C 22 C 22 A A C 21 13 Bx4 Ø15x10mm Connect plate 20 and 21 with plate 22, put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown.
14 Cx8 Bx4 Ø15x10mm Ø6x30mm Attach the component to plate 18 with wooden dowel(C),put cam lock(B) into holes in plate 22 and turn clockwise to tighten as shown.
15 Nx2 Rotate leg support 19 into plate 18 as shown. Rotate part(N) into leg support 19 as shown.
16 Qx32 Px8 Ø3.5x12mm Fix part(P) to plate 18, 20 and 21 using screw(Q) as shown.
17 Jx8 Insert part(J) into corresponding holes in plate 11,14,15 and 13, place shelf 16 in as shown.
18 Jx4 Insert part(J) into corresponding holes in plate 14 and 15, place shelf 17 in as shown.
19 Fx2 Ex4 Gx2 Insert part(E) into plate 25 and 26 as shown. Fix part(G) and knob(F) to plate 25 and 26 respectively as shown.
20 Assembled the two door plate as shown.
21 Adjust leg support as shown.
22 Cx10 Ax4 Ø6x30mm Ø6x35mm Hanging cabinet Insert quickfit screw(A) into corresponding holes in two plate 4 as shown. C Insert wooden dowel(C) into plate 3 and 5 as shown. C 5 C C C 3 A C C C 23 C C 4 A A A 4 Bx2 Hx2 Ø15x10mm Ø20mm 4 Attach plate 4 to plate 3, put cam lock(B) into holes in plate 3 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 3 as shown.
Bx2 Hx2 Ø15x10mm Ø20mm Attach plate 4 to plate 5, put cam lock(B) into holes in plate 5 and turn clockwise to tighten as shown. Flip the part, stick part(H) to plate 5 as shown. 5 B 5 H 4 4 5 H B 180° ! 4 25 Cx6 Ø6x30mm C C C 8 C Insert wooden dowel(C) into plate 8 as shown.
26 Dx4 Ax12 Ø6x35mm Attach the two components to plate 8, then fix using screw(D) as shown. Insert quickfit screw(A) into corresponding holes in two plate 1 as shown.
27 Bx4 Ø15x10mm Mx6 Ø4x35mm Fix plate 2 to plate 1 using screw(M) as shown. Cover plate 1 to plate 3,5 and 8, put cam lock(B) into holes in plate 3,5 and turn clockwise to tighten as shown.
28 Bx4 Hx8 Ø15x10mm Ø20mm Stick part(H) to plate 3,8 and 5 as shown. Put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
29 Cx8 Bx4 Ø6x30mm Ø15x10mm Attach plate 6 and 7 to plate 1 with wooden dowel(C),put cam lock(B) into holes in plate 6,7 and turn clockwise to tighten as shown. Insert wooden dowel(C) into plate 6 and 7 as shown.
30 Dx12 Hx4 Ø4x35mm Ø20mm Cover plate 9 to the unit, then fix using screw(D) as shown. Stick part(H) to plate 6 and 7 as shown.
31 Please use a tape measure to measure the distance between the three wall hanging holes on plate 8 and the distance from the hole center to the bottom of plate 9. Please use a tape measure to measure the distance between the three wall hanging holes on No. 8 plate and the distance from the hole center to the bottom of No.
32 Rx3 Ø8x40mm 8 9 1100mm 1690mm 10 Please use the electric drill to lead three holes in the wall according to the value measured in the previous step 1 and the relevant data in this step, WALL WALL R R 31/42 R
33 Sx3 Ø5x60mm Fix the upper cabinet to part(R) on wall through hardware pack(S) as shown.
34 Hx12 Ø20mm If there is no high cabinet, please use hole sticker (H) to cover the holes on the appearance of the hanging cabinet and TV cabinet respectively. If there is a high cabinet, please skip step 34 and directly install step 35.
35 If there are left and right high cabinets, hanging cabinets and TV cabinets, please install them as shown in the figure below.
36 Left high cabinet Right high cabinet 27 42 Take out shelf 16 and 17 from cabinets.
37 Assemble four units together as shown.
38 Wx12 Xx12 Ø8x18mm Ø6x18mm Fix them together using hardware pack(W,X) as shown.
39 Place shelf 16 and 17 in.
40 Please measure the distance between these holes and the distance from the hole center to the bottom.
41 Drill holes on wall.
42 Vx2 Rx3 Ø6x30mm Ø8x40mm Knock part(R) and (V) into holes.
43 Dx2 Sx3 Ø4x35mm Ø5x60mm Fix the cabinet to part(R,V) on wall through hardware pack(S,D) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
