Hall Tree Version:01/20/2024 1/38
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 76+5 B x 76+5 C x 50+4 6 x 35 mm 15 x 11 mm 8 x 30 mm Fx7 Gx8 H x 12 M x 12+1 Px1 Dx3 L=300 mm J x 16+1 E x 50+4 3 x 12 mm K x 76+5 4 x 22 mm Lx6 4 x 30 mm Sx3 3.5 x 14 mm Tx3 3/38 x2 Q x 48+4 3.
18 1 19 3 7 5 37 37 6 2 8 39 4 13 10 12 20 25 14 22 15 11 23 24 15 34 21 33 24 15 32 35 36 16 17 17 26 25 ALWAYS install Anti-tip device provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
C x4 Ax4 6 x 35 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 16 at first. C A A C AC C 16 16 A AC Bx4 2 15 x 11 mm Attach board 17 to board 16, add cam lock(B) into board 17 and turn clockwise to tighten as shown.
Ax6 Cx4 Dx1 Ex2 3 6 x 35 mm 8 x 30 mm L=300 mm 3 x 12 mm Fix rail(D) to board 11 with screw(E) as shown. Screw eccentric rod(A) and insert wooden dowel(C) into board 16 at first. E E A E 11 A D-CL D-CL E D-CL E C C 11 C A A AC A A Ax6 C 11 Cx4 Dx1 Ex2 4 6 x 35 mm 8 x 30 mm L=300 mm 3 x 12 mm Fix rail(D) to board 12 with screw(E) as shown. Screw eccentric rod(A) and insert wooden dowel(C) into board 12 at first.
Ax6 5 6 x 35 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 4 at first. A A A A 4 A 4 A Ax2 C A Cx2 6 6 x 35 mm 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 14 at first.
Ex4 Sx2 7 3 x 12 mm Fix part(S) to board 14 with screw(E) as shown. E 14 14 E E E E E S S Bx2 8 15 x 11 mm Attach board 13 to board 14, add cam lock(B) into board 13 and turn clockwise to tighten as shown.
Bx6 9 15 x 11 mm Attach board 14, 16 and 17 to board 11, add cam lock(B) into board 14, 16, 17 and turn clockwise to tighten as shown. 14 B 17 B B B 11 16 B 16 17 B 11 180° B Bx6 10 15 x 11 mm Attach board 12 to board 14, 16 and 17, add cam lock(B) into board 14, 16, 17 and turn clockwise to tighten as shown.
Cx6 Dx1 Ex4 11 8 x 30 mm L=300 mm 3 x 12 mm C C C 13 CE C C E D-CR E E D-CL E 14 D-CL 13 D-CR 12 E D-CR E E E 11 Fix rail(D) to board 13 with screw(E) as shown. Insert wooden dowel(C) into board 11, 12 and 13 at first. 12 Insert back board 10 along available grooves as shown.
Bx6 13 15 x 11 mm 4 B B 13 B B B 4 B 12 B 12 11 180° Attach board 4 to board 11, 13 and 12, add cam lock(B) into board 11, 12, 13 and turn clockwise to tighten as shown. H x 12 14 Rotate layer pin(H) into board 11 and 12 as shown.
Ax5 Cx4 15 6 x 35 mm 8 x 30 mm A C C A A A 4 C C 12 A 15 C 4 11 A 15 15 Fx1 Gx2 Place shelf board 15 in as shown. Screw eccentric rod(A) and insert wooden dowel(C) into board 4 at first. Qx4 16 4 x 22 mm 3.5 x 14 mm Fix hinge(G) to board 25 with screw(Q), fix knob(F) as shown.
Gx2 Fx1 Qx4 17 4 x 22 mm 3.5 x 14 mm Fix hinge(G) to board 26 with screw(Q), fix knob(F) as shown. 26 F F Q Q 26 Q F G Q 26 Q Q G G Q x 16 18 3.5 x 14 mm 12 Qx4 Assemble door panel 25 and 26 to board 11 and 12 by fixing hinge with screw(Q) as shown.
Ax8 Fx2 19 4 x 22 mm 6 x 35 mm Screw eccentric rod(A) into board 31, fix knob(F) as shown. A A A A F 31 31 A A 31 F F F Mx8 20 4 x 30 mm Fix board 27 and 28 to board 29 with screw(M) as shown.
21 Insert bottom board 30 along available grooves as shown. 29 27 28 30 x2 Bx8 22 15 x 11 mm Attach board 31 to board 27 and 28, add cam lock(B) and turn clockwise to tighten as shown.
Dx2 Ex8 23 L=300 mm 3 x 12 mm E Fix runner(D-DL) and (D-DR) to board 27 and 28 with screw(E) as shown. E D-DL D-DR E D-DR E E 28 D-DL D-DL E E 27 x2 27 24 Align rails, insert drawers.
Ax7 Cx6 25 6 x 35 mm 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 2 at first. C A C C C A A C A A C A C A 2 A 2 Ax7 Cx6 26 6 x 35 mm 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 3 at first.
S x1 P x1 Ex2 P x2 27 3 x 12 mm 3.5x14 mm Fix part(P) at first. Fix part(S) to board 1 with screw(E) as shown. P E P P E P P 1 1 E E S Bx7 28 15 x 11 mm Attach board 1, 5, 6 and 8 to board 2, add cam lock(B) into board 1, 5, 6, 8 and turn clockwise to tighten as shown.
29 1 7 5 6 8 2 Bx7 30 15 x 11 mm Attach board 3 to board 1, 5, 6 and 8, add cam lock(B) into board 1, 5, 6, 8 and turn clockwise to tighten as shown.
Fx2 Gx4 Qx8 31 4 x 22 mm 3.5 x 14 mm Fix hinge(G) to board 37 with screw(Q), fix knob(F) as shown.
Q x 16 32 3.5 x 14 mm Assemble door panel 37 and 37 to board 2 and 3 by fixing hinge with screw(Q) as shown.
Bx5 33 15 x 11 mm Attach the component to the cabinet (assembled in step 25), add cam lock(B) into and turn clockwise to tighten as shown.
Ax3 Cx2 34 6 x 35 mm 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 19 at first. A C A A C 19 19 A C Bx3 35 15 x 11 mm Attach board 18 to board 19, add cam lock(B) into board 18 and turn clockwise to tighten as shown.
Ax2 36 6 x 35 mm Screw eccentric rod(A) into board 23 at first. A 23 A A 23 Bx2 37 15 x 11 mm Attach board 23 to board 24, add cam lock(B) into board 24 and turn clockwise to tighten as shown.
Ax4 Cx2 Dx1 Ex2 38 6 x 35 mm 8 x 30 mm L=300 mm Fix rail(D) to board 21 with screw(E) as shown. Screw eccentric rod(A) and insert wooden dowel(C) into board 21 at first. D-CL E D-CL C A E 21 E E 3 x 12 mm A A C 21 21 A Ax4 E D-CL Cx2 Dx1 C A Ex2 39 6 x 35 mm 8 x 30 mm Fix rail(D) to board 22 with screw(E) as shown. Screw eccentric rod(A) and insert wooden dowel(C) into board 22 at first.
Bx4 40 15 x 11 mm Attach board 21 to board 23 and 24, add cam lock(B) into board 23, 24 and turn clockwise to tighten as shown. 24 23 B 23 B 24 B B 180° 21 B 21 Bx4 41 15 x 11 mm 22 22 B B B B B B 24 24 180° 23 21 24 23 Attach board 22 to board 23 and 24, add cam lock(B) into board 23, 24 and turn clockwise to tighten as shown.
42 Insert back board 25 along available grooves as shown. 25 22 21 Ax4 43 6 x 35 mm Screw eccentric rod(A) into board 20 at first.
Ax4 Cx4 44 6 x 35 mm 8 x 30 mm Screw eccentric rod(A) and insert wooden dowel(C) into board 20 at first. A C C A C A 20 C A C A 20 Bx4 45 15 x 11 mm 20 20 B B 25 B 22 B B 22 180° 21 Attach board 20 to board 21 and 22, add cam lock(B) into board 21, 22 and turn clockwise to tighten as shown.
Bx4 46 15 x 11 mm Attach board 18 and 19 to board 20 , add cam lock(B) into board 18, 19 and turn clockwise to tighten as shown.
Rx5 47 4 x 20 mm R Fix board 3 and 11 to board 18 and 21 with screw(R) as shown.
E x 16 J x 16 48 3 x 12 mm E J E 7 J E J 7 J J J E Insert buckle(J) into back slots and fix to tighten with screws(E) as shown.
Mx4 49 4 x 30 mm Fix board 32 and 33 to board 34 with screw(M) as shown. M M M M 34 33 M 32 33 50 Insert bottom board 35 along available grooves as shown.
Ax4 Fx1 51 6 x 35 mm 4 x 22 mm Screw eccentric rod(A) into board 36, fix knob(F) at first. A A A A F 36 A A 36 36 F F F Bx4 52 15 x 11 mm Attach board 36 to board 32 and 33, add cam lock(B) and turn clockwise to tighten as shown.
Dx1 Ex4 53 L=300 mm 3 x 12 mm E Fix runner(D-DL) and (D-DR) to board 32 and 33 with screw(E) as shown. E D-DL D-DR E D-DR E E E 33 D-DL E 32 32 Ex6 Tx3 54 3 x 12 mm T T T Ex2 Ex2 T 19 E 19 E Fix hook(T) to board 19 with screw(E) as shown.
Lx4 K x 76 55 Place seat cushion 39 on board 20.
P x1 56 x2 Drill holes on your wall, and knock part(P) into.
P x1 57 Install anti-tipping device as shown.
58 If doors are still not aligned if the hinges are properly correctly, please watch the video. https://youtu.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
