Cabinet Version:05/16/2023 1/22
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 64 B x 64 C x 38 4 x 40 mm 6 x 35 mm Fx4 Gx4 4 x 16 mm K x 15 H x 14 I x 14 Lx5 Mx2 Nx2 4 x 35 mm Qx4 CL x 2 5 x 40 mm DR x 2 3/22 E x 10 4 x 30 mm J x 24 3.
1 6 7 14 4 14 5 2 8 24 10 25 3 23 13 9 21 10 12 22 26 12 11 17 18 19 20 16 15 x2 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
A x 10 1 K x 15 6 x 35 mm Lx5 3 x 12 mm A A A A A A A A 2 1 A A 4 A A K K K 4 L 6 Screw eccentric rod(A) into board 1, 2 and 4 with a screwdriver as shown. Fix hook(L) to board 6 with screw(K) as shown.
Ax2 2 B B x 12 Cx4 6 x 35 mm 180° B 2 6 B 6 B B A B 2 A A A 4 1 C C B Connect board 6 to board 2 and 4, add cam lock(B) into board 6 and turn clockwise to tighten as shown. Screw eccentric rod(A) into board 6 as shown. Attach board 1 to board 2, 4 and 6 using wooden dowel(C) at first, add cam lock(B) into board 2,4,6 and turn clockwise to tighten as shown.
A x 12 3 6 x 35 mm Screw eccentric rod(A) into board 3, 5, 22 and 24 at first.
4 Bx8 Insert back board 14 along available grooves as shown. Attach board 3 to board 2; board 5 to board 4, add cam lock(B) into board 2, 4 and turn clockwise to tighten as shown.
A x 10 5 6 x 35 mm A A A 8 A A 8 180° A Screw eccentric rod(A) into board 8 at first. Flip the board, screw eccentric rod(A) as well.
6 Bx6 Cx4 180° B 8 B 7 4 C B B 7 B C B 2 B B Attach board 8 to board 2, 4 and 7 using wooden dowel(C) at first, add cam lock(B) into board 2,4,7 and turn clockwise to tighten as shown.
Ax2 7 Dx8 6 x 35 mm CL x 2 J x 12 4 x 40 mm CR x 2 3.5 x 12 mm Cx8 J J J CL/CR D 23 D Screw eccentric rod(A) into board 21 and 23 as shown. D A J D 23 J J CR J J D 10 J CR 10 D C 21 / 23 J C 21 D 21 D CL D D 21 J CL 10 J A J J J CL A 10 Attach board 10 to board 23 using wooden dowel(C) at first, then fix board 10 to board 23 with screw(D), then fix slide rail(CR) to board 10 with screw(J) as shown.
Bx2 8 Cx2 Connect board 13 to board 21 and 23 using wooden dowel(C) at first, add cam lock(B) into board 13 and turn clockwise to tighten as shown.
9 Bx4 Cx4 Attach board 21 and 23 to board 8 using wooden dowel(C) at first, add cam lock(B) into board 21,23 and turn clockwise to tighten as shown.
10 Bx4 Insert board 25 along available grooves at first. Attach board 22 to board 21; board 24 to board 23, add cam lock(B) into board 21,23 and turn clockwise to tighten as shown.
11 A x 10 Cx4 Qx4 6 x 35 mm 5 x 40 mm A A A A A A A A A A 9 9 A Screw eccentric rod(A) into board 9 at first. Attach board 9 to board 21 and 23 using wooden dowel(C), and fix with screw(Q) as shown.
12 Ax8 Bx8 Cx4 6 x 35 mm A A AA AA 11 AA 26 AA 11 Screw eccentric rod(A) into board 26 and 11 at first. Connect board 12 to board 11 and 26 using wooden dowel(C) at first, add cam lock(B) into board 12 and turn clockwise to tighten as shown.
13 B x 10 Cx8 Fix board 10 to board 23 with screw(D) at first, then fix slide rail(CR) to board 10 with screw(J) as shown. Fix board 10 to board 21 with screw(D) at first, then fix slide rail(CL) to board 10 with screw(J) as shown. Attach the part to board 9 using wooden dowel(C) at first, add cam lock(B) into board 11,12,26 and turn clockwise to tighten as shown.
14 H x 14 I x 14 3 x 14 mm Insert buckle(I) into back slots and fix with screw(H) as shown.
Mx2 15 Nx2 Ox2 4 x 35 mm Px2 4 x 12 mm Fix part(P) to board 1 with screw(O) as shown. Install anti-tipping device as shown.
A x 10 16 E x 10 B x 10 6 x 35 mm 4 x 30 mm x2 A A A A 15 A A 15 17 16 B B 20 17 B 15 B 15 B 180° B 18 19 B Screw eccentric rod(A) into board 15. Attach board 16, 20 and 17 to board 15, add cam lock(B) and turn clockwise to tighten. Insert bottom board 19 along grooves. Fix board 18 to board 16 and 17 with screw(E) as shown.
Fx4 17 Gx4 DL x 2 J x 12 4 x 16 mm DR x 2 3.5 x 12 mm x2 J J J DL/DR 16 J J DL DR J J J DR 17 Fix runner(DL) and (DR) to board 17 and 16 with screw(J). Fix knob(G) to board 15 with screw(F).
18 Insert the drawers in.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
