Sideboard Version:06/22/2022 1/23
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 52 B x 52 6 x 35 mm 15 x 9 mm Ex2 4 x 14 mm Jx6 C x 60 Dx2 6 x 30 mm F x 12 G x 43 4 x 35 mm Hx6 3 x 12 mm K x 48 Lx6 3.
1 10 6 3 5 4 7 8 18 2 18 18 9 15 17 20 12 17 21 14 11 13 19 22 19 19 16 4/23
1 Ax4 6 x 35 mm Insert quickfit screw(A) into both sides of No.5 as shown. Please pay attention to the holes where the accessories are inserted.
2 Bx4 Cx4 15 x 9 mm 6 x 30 mm Connect No.4 and No.6 to No.5 with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown.
Dx2 Ax6 3 Ex2 6 x 35 mm 4 x 14 mm Fix part(D) with screw(E) as shown. Insert quickfit screw(A) into both sides of No.7 as shown.
4 Bx4 Cx2 15 x 9 mm 6 x 30 mm Attach No.8 to No.7 with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown.
Bx2 5 Cx2 15 x 9 mm 6 x 30 mm Connect 2 components with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
6 A x 10 6 x 35 mm Insert quickfit screw(A) into corresponding holes in No.2 and No.3 as shown. Please note don't use an electric screwdriver or use force to rotate, may cause crack.
B x 10 7 C x 10 15 x 9 mm 6 x 30 mm Attach No.2 and No.3 to the assembled unit with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown.
A x 12 8 6 x 35 mm Insert quickfit screw(A) into corresponding holes in No.1 and No.9 as shown.Please note don't use an electric screwdriver or use force to rotate, may cause crack.
9 Bx6 C x 10 15 x 9 mm 6 x 30 mm Fx4 4 x 35 mm Cover No.1 to the component with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown. Cover No.9 to the component with wooden dowel(C), then use screw(F) to fix as shown.
10 A x 10 6 x 35 mm Insert quickfit screw(A) into both sides of No.12 as shown. A 180° A 11 A A A A 12 A A 12 A A A A x 10 6 x 35 mm A Insert quickfit screw(A) into corresponding holes in No.11 and No.13 as shown.Please note don't use an electric screwdriver or use force to rotate, may cause crack.
B x 10 12 C x 10 15 x 9 mm 6 x 30 mm Attach No.14, No.22, No.15, No.20 and No.21 to No.12 with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown. I II Please pay attention to the holes where the accessories are inserted.
13 B x 10 C x 10 15 x 9 mm 6 x 30 mm Cover No.11 and No.13 to the component with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown. I II Please pay attention to the holes where the accessories are inserted.
14 Cx6 Fx6 6 x 30 mm 4 x 35 mm Attach No.16 to the unit with wooden dowel(C), then use screw(F) to fix as shown.
15 Bx6 15 x 9 mm Cx6 6 x 30 mm Connect two components with wooden dowel(C) and turn cam locks(B)clockwise to tighten as shown. Please pay attention to the holes where the accessories are inserted.
G x 43 16 3 x 12 mm Fix back panel No.10 and No.17 with screw(G) as shown.
17 Hx6 Lx3 K x 12 Mx6 3.5 x 12 mm 4 x 16 mm Fix handle(L) to No.18 with screw(M) as shown. Fix hinge(H) to No.18 with screw(K) as shown. K K K K H M M M K H 18 L 18 Jx6 Lx3 K x 12 H 18 x3 M L K Mx6 3.5 x 12 mm 4 x 16 mm Fix handle(L) to No.19 with screw(M) as shown. Fix hinge(J) to No.19 with screw(K) as shown.
19 K x 24 3.5 x 12 mm Attach No.18 to the side of upper cabinet by fixing hinge(H) with screw(K) as shown. Attach No.19 to the side of lower cabinet by fixing hinge(J) with screw(K) as shown.
20 Fx2 4 x 35 mm Nx2 6 x 30 mm Fix part(N) to your wall, stable the cabinet with screw(F) as shown.
21 Adjust the length of hinges to avoida gap btween doors as picture shown 23/23
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
