Storage Cabinet Version:07/20/2022 1/20
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 34 B x 34 6 x 35 mm 15 x 10 mm Fx4 CR x 2 4 x 14 mm 300mm Gx4 Hx6 C x 22 Dx7 E x 12 4 x 25 mm 4 x 35 mm CL x 2 DR x 2 DL x 2 300mm 300mm 300mm I x 36 Jx4 8 x 30 mm Kx2 4 x 14 mm Lx2 4 x 12 mm Mx2 6 x 30 mm N x 12 2 x 10 mm Q x 16 3 x 12 mm 3/20 Ox8 3 x 16 mm Px8
1 2 8 6 3 14 14 3 7 5 4 9 10 7 11 12 17 18 19 16 15 x2 4/20
A x6 1 6 x 35 mm Insert quickfit screw(A) into No.4 and No.12 plates as shown. A A A A A 4 A 12 A A x4 2 Please don't use an electric screwdriver or use force to rotate, may cause crack. K x2 6 x 35 mm L x2 4 x 12 mm Insert quickfit screw(A) into corresponding holes into No.1 plate at first. A A A K 1 A L L K L K A FLIP 5/20 1 Flip the plate, and fix part(K) with screw(L) as shown.
3 Dx3 4 x 25 mm Attach No.2 plate to No.1 with screw(D) as shown. D 1 D 2 D D 2 1 4 CR x 1 Qx4 CL x 1 3 x 12 mm Fix slide rail(CL) and (CR) to both side of No.9 plate respectively with screw(Q) as shown. Q CR Q 9 Q 9 Q Q CR FLIP Please pay attention to the holes where the accessories are inserted.
Dx4 A x 16 5 6 x 35 mm CR x 1 Qx4 CL x 1 3 x 12 mm 4 x 25 mm Insert quickfit screw(A) into No.5 and No.6 plates at first. Fix slide rail(CL) and (CR) to No.5 and No.6 plates respectively with screw(Q) as shown. A Q A A CL A 5 Attach No.7 plate to No.5 and No.6 with screw(D) as shown. A A D Q A CL Q A A D 7 Q CR A D A A 7 A 6 A A Q A D Please pay attention to the holes where the accessories are inserted.
6 Bx2 15 x 9 mm Cx 2 8 x 30 mm Attach No.9 plate to No.4 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown. B 9 C 4 BC B 4 7 C Ex2 4 x 35 mm Attach No.10 and No.11 plates to No.9 with screw(E) as shown.
Cx 8 Bx8 8 8 x 30 mm 15 x 9 mm Attach No.3,4,10,11 plates to No.5 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
9 Cx 8 Bx8 15 x 9 mm 8 x 30 mm Attach No.6 plate to No.3,4,10,11 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
10 J x4 Bx4 15 x 9 mm Attach No.12 plate to No.11 and turn cam locks(B) clockwise to tighten as shown. 12 11 J B J 3 J J 3 12 11 J B 11 Slide No.8 plates into available slots as shown.
Cx 4 Bx4 12 8 x 30 mm 15 x 9 mm Cover No.1 plate to the top with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
N x 12 Ox 8 P x8 2 x 10 mm 3 x 16 mm Fix back plates with part(P) and screw(N&O) as shown.
F x2 I x 12 Hx6 Gx2 4 x 14 mm 4 x 14 mm Fix hinge(H) to No.14 plate with screw(I). Please don't use an electric screwdriver or use force to rotate, may cause crack. Fix knob(G) with screw(F) as shoown.
I x 24 4 x 14 mm Attach No.14 door to side plates by fixing hinge with screw(I) as shown. H II II I II I I 14 Please don't use an electric screwdriver or use force to rotate, may cause crack.
If there is misalignment after you install, adjust the screw to the best condition.
F x2 Ax8 17 Gx 2 4 x 14 mm 15 x 9 mm Insert quickfit screw(A) into No.15 plate with a screwdriver as shown. A Fix knob(G) with screw(F) as shown. A A F A 15 A F x2 15 G G Bx8 18 15 x 9 mm Attach No.16 and No.17 plate to No.15, turn cam locks(B) clockwise to tighten as shown.
19 Slide No.19 plate into available slots as shown. 16 19 17 x2 E x8 20 4 x 35 mm Attach No.18 to No.16 and No.17 plates with screw(E) as shown.
21 Qx 8 DR x 2 DL x 2 3 x 12 mm Fix runner(DL) and (DR) to No.16 and No.17 plates respectively with screw(Q) as shown.
22 E x2 4 x 35 mm Mx 2 6 x 30 mm Install anti-dumping device(M,E) to stabilize the item.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
