Wardrobe Version:02/07/2023 1/26
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 47 Bx8 C x 55 6 x 34 mm 6 x 28 mm F x 16 G x 38 4 x 30 mm 3 x 12 mm Lx4 M x 48 Nx8 4 x 16 mm 150 x 34 mm 35 mm R x 32 3 x 12 mm 15 x 10 mm D x 48 E x 12 8 x 30 mm 4 x 40 mm H x 15 J x 15 Kx4 15.5 x 10 x 1.
1 32 9 21 23 11 28 13 27 29 25 4 2 16 20 30 18 26 8 14 5 3 16 19 18 17 x2 20 15 19 31 22 13 27 6 24 x2 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
/26
1 Ax4 6 x 34 mm Insert quickfit screw(A) into corresponding holes in plate 11 with a screwdriver as shown. A 11 A 11 A A A 2 Cx4 Dx4 15 x 10 mm 8 x 30 mm Attach plate 13 to plate 11 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 13 and turn clockwise to tighten as shown.
3 Ax4 6 x 34 mm Insert quickfit screw(A) into corresponding holes in plate 10 with a screwdriver as shown. A 10 A 10 A A A 4 Cx4 Dx4 15 x 10 mm 8 x 30 mm D 10 D D D C D C C 13 C C 13 13 11 The holes are facing down Attach plate 10 to plate 13 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 13 and turn clockwise to tighten as shown.
Ax6 5 6 x 34 mm Insert quickfit screw(A) into corresponding holes in plate 12 with a screwdriver as shown. A A A A 12 A 12 A A Ex6 6 Dx6 4 x 40 mm 8 x 30 mm E Attach plate 12 to plate 10,11 and 9 with wooden dowel(D), then fix using screw(E) as shown.
Ex6 7 Dx6 4 x 40 mm 8 x 30 mm E Attach plate 1 to plate 10,11 and 9 with wooden dowel(D), then fix using screw(E) as shown. F 4 x 40 mm E E D E D E D 13 10 D 13 E 1 D 11 E D 9 12 E 1 D Ax4 8 6 x 34 mm Insert quickfit screw(A) into plate 2 and 3 with a screwdriver as shown.
Cx4 9 Dx2 15 x 10 mm 8 x 30 mm Attach plate 2 to plate 14 with wooden dowel(D); put cam lock(C) into holes in plate 14 and turn clockwise to tighten as shown. Attach plate 3 to plate 15 with wooden dowel(D); put cam lock(C) into holes in plate 15 and turn clockwise to tighten as shown. C 14 2 C C 3 D D 14 10 Qx4 C 15 C Rx8 35 x 400 mm 3 x 12 mm Separate glide into two parts at first(Page 5). Fix slide rail(Q) to plate 6 and 7 using screw(R) as shown.
Qx4 11 Rx8 35 x 400 mm 3 x 12 mm J Fix slide rail(Q) to plate 8 using screw(R) at first. Flip the plate, and fix slide rail(Q) as shown. R 3 x 16 mm 180° R R Q 8 R R R R Q 3 x 12 mm R Q 8 8 Q R R Q R 12 R R R Ax2 6 x 34 mm Insert quickfit screw(A) into plate 7 as shown.
C x1 13 Dx2 15 x 10 mm 8 x 30 mm 7 Attach plate 3 and 15 to plate 7 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 3 and turn clockwise to tighten as shown. C C D D D 3 3 15 15 C x1 14 Dx1 15 x 10 mm 8 x 30 mm 7 C C D D 5 3 15 5 Attach plate 5 to plate 7 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 5 and turn clockwise to tighten as shown.
15 Ax4 6 x 34 mm Insert quickfit screw(A) into plate 8 at first. Flip the plate, insert quickfit screw(A) as well. 180° A 8 A A A A 8 16 C x2 Dx3 15 x 10 mm 8 x 30 mm Attach plate 8 to plate 5,3 and 15 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 3,5 and turn clockwise to tighten as shown.
17 C x1 Dx2 15 x 10 mm 8 x 30 mm 7 3 5 8 15 C C D D Attach plate 2 and 14 to plate 8 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 2 14 and turn clockwise to tighten as shown. 18 C x1 D 2 2 14 Dx1 15 x 10 mm 8 x 30 mm 7 5 C 3 8 D C 4 15 Attach plate 4 to plate 8 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 4 and turn clockwise to tighten as shown.
Ax2 19 6 x 34 mm Insert quickfit screw(A) into plate 6 as shown. A 6 A A 6 C x2 20 Dx3 15 x 10 mm 8 x 30 mm Attach plate 6 to plate 4,2 and 14 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 2,4 and turn clockwise to tighten as shown.
C x6 21 Dx6 15 x 10 mm 8 x 30 mm D 7 C 13 10 C 7 1 13 D 11 12 D C C 8 D 9 C D C D D C Connect the two components with wooden dowel(D) at first. Put cam lock(C) into holes in plate 7,8,6 and turn clockwise to tighten as shown. 6 H x 15 G x38 22 3 x 12 mm J x15 15.5 x 10 x 1.
Ax5 23 6 x 34 mm Insert quickfit screw(A) into plate 32 as shown. A A A 32 A A A 24 32 32 C x5 15 x 10 mm C C 1 C C C 9 C 13 13 1 10 12 7 17/26 Attach plate 32 to plate 1 at first. Put cam lock(C) into holes in plate 1 and turn clockwise to tighten as shown.
25 Ux4 Sx2 Tx1 53 x 24 x 12 mm 770 mm 4 x 18 mm M U 4 x 16 mm 4 x 14 mm 1 T S U U 9 2 1 11 13 10 13 T 12 Fix part(S) to plate 9 and 11 using screw(U) as shown. Place clothing rod(T) as shown. Kx4 26 35 mm 7 Mx8 4 x 16 mm Fix hinge(K) to plate 27 and 29 respectively using screw(M) as shown.
27 Mx8 Lx4 4 x 16 mm 35 mm Fix hinge(L) to another plate 27 and 28 respectively using screw(M) as shown. M M 4 x 16 mm M M ML U K L 4 x 14 mm L 27 M M 28 M M L M L M L 28 28 Px4 M x 16 Nx2 4 x 16 mm 150 x 34 mm 4 x 18 mm M K M 27 M M 4 x 16 mm M 9 27 P N P L MM P P K N 1 K MM 9 27 U M M 27 N 11 P P 13 13 L M M 12 Attach plate 27(with hinge K) to left side plate 9 using screw(M) as shown.
29 Px4 M x 16 Nx2 4 x 16 mm 150 x 34 mm 4 x 18 mm M 4 x 16 mm M M K 1 MM L 10 P 10 P M N N M 4 x 14 mm K M M 29 10 P P M M 29 28 11 M U K M 29 P L N P Attach plate 29(with hinge K) to right side plate 10 using screw(M) as shown. Attach plate 28(with hinge L) to middle plate 11 using screw(M) as shown. Fix handle(N) to both door plates using screw(P) as shown. 7 30 Qx8 R x 16 35 x 400 mm 3 x 12 mm Fix runner(Q) to plate 16 and 17 using screw(R) as shown.
Bx4 31 6 x 28 mm 18 B B 18 x4 Insert quickfit screw(B) into plate 18 as shown. F x 16 32 4 x 30 mm E 4 x 40 mm F F F 16 17 F 18 F F 16 x4 Fix plate 16 and 17 to plate 18 using screw(F) as shown.
33 17 18 19 16 Slide plate 19 along grooves as shown. C x4 34 15 x 10 mm x4 Dx4 8 x 30 mm Attach plate 20 to plate 18 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 20 and turn clockwise to tighten as shown.
A x 16 35 Bx4 6 x 28 mm 6 x 34 mm Insert quickfit screw(A) and (B) into plate 30 and 31 as shown. A A 31 B A A A A A 30 B 30 A C x10 36 x2 A Dx2 15 x 10 mm 8 x 30 mm 30 C D 20 16 C 19 D 30 30 17 C 20 C C 17 C x2 Attach plate 30 to plate 20 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 16,17,20 and turn clockwise to tighten as shown.
Px4 Nx2 37 4 x 18 mm 150 x 34 mm Fix handle(N) to plate 30 using screw(P) as shown. 30 N P 17 N 30 P P P x2 16 C x10 38 Dx2 15 x 10 mm 8 x 30 mm 31 C D 20 16 C 19 D 31 31 17 C 20 C C 17 C x2 Attach plate 31 to plate 20 with wooden dowel(D) at first. Put cam lock(C) into holes in plate 16,17,20 and turn clockwise to tighten as shown.
39 Nx2 150 x 34 mm Px4 4 x 18 mm Fix handle(N) to plate 31 using screw(P) as shown. 31 17 N P N 31 P P P 16 40 Align rails, slide all drawers.
41 Vx1 3 2 1 42 26/26
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
