Office Desk Version:03/10/2023 1/22
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 16 M5 x 42 mm B x 16 15 x 12 mm C x 44 M3.5 x 14 mm D x 16 8 x 40 mm Ex6 M6 x 20 mm Fx6 Gx6 Hx4 I x 24 Jx2 M6 x 45 mm M6 x 50 mm M6 x 70 mm M5 x 40 mm M6 Kx4 L x 2 SETS Mx2 Nx2 Ox1 Q x 12 Rx 4 x1 x1 5 mm Px8 30 x 3 mm 4# M3.
x3 3508 14" 4/22
/22
1 C x 12 M3.5 x 14 mm C C C C C C C C C Fix slide rail 23 to board 7 and 8 with screw(C) as shown.Please pay attention to the holes where the accessories are inserted.
2 Ax4 Bx4 M5 x 42 mm Dx4 15 x 12 mm 8 x 40 mm Insert quickfit screw(A) to board 7 and 8 as shown. Attach board 7 and 8 to board 20 with wooden dowel(D), then turn cam locks(B) clockwise to tighten as shown. A A A D 16 m m A A D A B D B D B D B Please pay attention to the holes where the accessories are inserted.
3 Ax6 Bx6 M5 x 42 mm Dx6 15 x 12 mm 8 x 40 mm Insert quickfit screw(A) to board 6 as shown. Cover board 6 to the component and board 9 with wooden dowel(D), then turn cam locks(B) clockwise to tighten as shown. Please note the slots of board 7, 8, and 9 are in a level position.
4 Insert back board 22 into available slots as shown. 5 Ax6 M5 x 42 mm Insert quickfit screw(A) to board 5 as shown. Please pay attention to the holes where the accessories are inserted.
Bx6 6 Dx6 15 x 12 mm 8 x 40 mm Cover board 5 to the assembled component with wooden dowel(D), then turn cam locks(B) clockwise to tighten as shown.
7 L x 2 SETS Px8 Cx4 30 x 3 mm M3.5 x 14 mm Fix part(L) to board 5/6 with screw(C) as shown.
8 Kx4 5 mm Insert part(K) into corresponding holes of board 8 and 9 as shown. Put shelf board 12.
C x 12 Mx2 9 M3.5 x 14 mm Fix hinge(M) to board 11 with screw(C) as shown. Attach door 11 to board 9 by fixing hinge with screw(C) as shown.
C x 12 Nx2 10 M3.5 x 14 mm C N C C N N Fix hinge(N) to board 10 with screw(C) as shown. Attach door 10 to board 8 by fixing hinge with screw(C) as shown.
11 Hx4 Fx4 M6 x 70 mm M6 x 45 mm Fix part 1 to part 3 with screw(F), fix part 2 to part 3 with screw(H) as shown. H H H H H F F F F F 12 Gx6 M6 x 50 mm Attach leg base to board 4 by fixing part 3 with screw(G) as shown.
13 Fx2 Jx2 M6 x 45 mm M6 Connect part 2 with board 5/6 using screw(F) and nut(J) as shown.
13 OR Ox1 If you wanna to flexibly adjust the desktop, stick Non-slip pad(O) to part 2 just.
14 I x 12 M5 x 40 mm Attach board 19 to board 16 and 17 with screw(I) as shown. I I I I I I X3 15 Insert board 21 into available slots as shown.
16 I x 12 M5 x 40 mm Attach board 18 to board 16 and 17 with screw(I) as shown. I I I I I I X3 17 Q x 12 M3.5 x 12 mm Fix runner 23 to board 18 and 19 with screw(Q) as shown. Please pay attention to the holes where the accessories are inserted.
18 Align rails, put all drawers. OR 19 Cx4 Rx4 M3.5 x 14 mm Insert buckle(R) into slots and fix with screw(C) as shown.
20 Ex6 M6 x 20 mm E E E E E E E OR Fix board 13, 14 and 15 sequentially to drawer face with screw(E) as shown. OR Fix board 15, 14 and 13 sequentially to drawer face with screw(E) as shown.
If there is misalignment after you install, adjust the screw to the best condition OR 22/22
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
