Instructions / Assembly

P.2
Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY: 1 - 2
ESTIMATED ASSEMBLY TIME: 1 HOUR
‐ Open your item in the area you plan to keep it to avoid excessive
heavy lifting.
‐ Identify, sort and count the parts before attempting assembly.
‐ Compression dowels are lightly tapped in with a hammer.
‐ Slides are labeled with a R (right) and L (left) for proper placement.
‐ Make sure to always face the point on the top of the Cam Lock
towards the outer edge.
‐ Use all the nails provided for the back panel and spread them out
equally.
‐ Back panel must be used to make sure your unit is sturdy.
‐ Do NOT use harsh chemicals or abrasive cleaners on this item.
‐ Never push, pull, or drag your furniture.
Before You Start
Read through each step carefully and follow the proper order‐
Separate and count all your parts and hardware‐
Give yourself enough room for the assembly process‐
Have the following tools: Hammer‐
Caution: If using a power drill or power screwdriver for screwing,‐
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.