Shoe cabinet Version:10/07/2023 1/14
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 18 4 x 40 mm F1 x 4 Ix4 Px2 B x 24 3.5 x 14 mm F2 x 4 Cx4 Dx2 4 x 10 mm F3 x 4 4 x 18 mm G x 16 6 x 30 mm Nx4 Kx2 Mx2 2.
1 9 3 5 2 5 4 7 7 8 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 Hx4 F2 x 4 F1 x 4 6 x 30 mm Hammer F1 & F2 slightly into the holes on panel 2 &3, Note do not tilt to avoid damage. Insert the wooden tenon (H) into plate 1, as shown.
2 Ax8 Gx8 4 x 40 mm 12 mm Attach panel 1,4 and 5 to panel 3 using screw A as shown.
Ax8 3 Gx8 4 x 40 mm 12 mm Attach panel 1,4 and 5 to panel 2 using screw A as shown.
4 J x 20 Ix4 2.5 x 14 mm Fix panel 9 to the back of assembled unit using screw J to pre-drilled holes as shown. Fix part I to the bottom.
5 B x 16 Dx2 Ex4 3.5 x 14 mm Lx2 Rx2 4 x 18 mm Fix plastic part L&R to panel 8, use screw B to tighten. Attach this part to panel 6 using screw B to corresponding holes as shown B B R R B R 8 B B B 8 B B E B L L B E 6 E D 6 x2 D 6 Bx4 3.5 x 14 mm B C 3.5 x 14 mm 4 x 10 mm Attach panel 7 to the assembled part using screw B slightly to tighten, as shown.
7 Cx4 F3 x 4 4 x 10 mm C Fix the plastic part L&R to panel 2&3 by using F3 slightly. Then screw C to tighten. 4 x 10 mm C 3 F3 C 2 F3 C L 6 F3 C L F3 C R 6 10/14 R F3 B 3.
8 Insert panel 7 to the middle of drawers 7 7 11/14
9 Bx4 3.5 x 14 mm Using screw B to fix panel 7 to both side plastic part as shown. B C 3.
10 Ax2 Nx4 4 x 40 mm Kx2 3 x 14 mm Mx2 6 x 30 mm Fix part(N) to plate 2 and 9 with screw(K) at first. And fix part(M) to a proper position on your wall. Fix part(N) to part(M) with screw(A) as shown.
11 Px2 P P P 14/14
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
