Changing Table Version:09/22/2022 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 38 B x 38 C x 24 Dx2 E x 16 Ø6 x 34mm Ø15 x 10mm Ø6 x 30mm 80 x 37 x 1.
9 9 12 11 10 88 4 4 1 1 4 4 18 3 3 6 18 18 16 15 14 3 3 3 6 13 5 17 x3 4/16 7 7 2 2
Ax4 1 Ø6 x 34mm Insert quickfit screw(A) into corresponding holes in No.9 and No.10 plate with a screwdriver as shown. A 9 A A 10 A A A 2 Bx2 Cx1 Ø15 x 10mm Ø6 x 30mm Attach No.9 to No.11 and No.12 plate with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown.
3 Bx2 Cx1 Ø15 x 10mm Ø6 x 30mm Attach No.10 to No.11 and No.12 plate with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown. 10 B 11 C B 12 C B 180° 4 9 Fx3 CL 300mm Fx3 G x 12 300mm Ø4 x 14mm CR Please pay attention to the holes where the accessories are inserted. Fix slide rail(CL) and (CR) to No.1 and No.2 plate respectively G with screw(G) as shown.
A x 12 5 Ø6 x 34mm Insert quickfit screw(A) into corresponding holes in No.1 and No.2 plate with a screwdriver as shown. A A 2 A A A A A A 1 A A A A A A 6 Bx2 Cx2 Ø15 x 10mm Ø6 x 30mm Attach No.6(x2) plates to No.2 with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
7 Bx1 Cx1 Ø15 x 10mm Ø6 x 30mm Attach No.7 plate to No.2 with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown. 6 6 7 B C B 180° C 2 8 Bx3 Cx3 Ø15 x 10mm Ø6 x 30mm Attach No.4(x2) and No.5 plates to No.2 with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
Slide No.3(x2) plate into available slots as shown. 3 4 3 5 2 10 Bx6 Cx6 Ø15 x 10mm Ø6 x 30mm Attach No.1 to No.4(x2), No.5, No.6 and No.7 plates with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
11 Slide No.3 plate into available slots as shown. 1 3 3 2 12 3 Ax4 Ø6 x 34mm Insert quickfit screw(A) into corresponding holes in No.8 plate with a screwdriver as shown.
13 Bx4 Cx4 Ø15 x 10mm Ø6 x 30mm Cover No.8 plate to the top of the unit with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown. 8 C B C 2C 180° B B C 2 B C B 1 14 M x 12 Ø4 x 30mm Connect No.16 and No.17 with No.13 plate using screw(M) as shown.
15 Slide No.14 plate into available slots as shown. 16 13 14 17 x3 M x 12 16 Ø4 x 30mm Connect No.18(x2) with No.13 plate using screw(M) as shown.
17 A x 18 Ø6 x 34mm Insert quickfit screw(A) into No.15 plate with a screwdriver as shown. A A A A 15 A A A A 18 B x 18 Cx6 Ø15 x 10mm Ø6 x 30mm x3 Attach No.15 to No.16,18,17 plates with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown.
19 Hx3 Jx6 130 x 13 x 23mm Ø4 x 20mm Fix handle(H) to No.15 plate with screw(J) as shown. H 17 15 14 H J J 13 J 16 20 Fx3 DL 300mm DR Fx3 G x 12 300mm Ø4 x 14mm x3 Fix runner(DL) and (DR) to No.16 and No.17 plate respectively with screw(G) as shown.
21 Align rails, slide all drawers. 8 1 22 Dx2 E x 16 80 x 37 x 1.5mm Ø4 x 12mm Fix No.8 and No.12 plate together using iron sheet(E) and screw(D) as shown.
23 K x 12 L x 12 14x13x10mm Ø3 x 16mm Nx1 Reinforce the back plates with part(K) and screw(L) as shown. Install anti-tipping device(N) as shown.
