Cabinet Version:05/15/2023 1/24
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 55 B x 55 C x 40 4 x 40 mm 6 x 35 mm Fx3 Dx4 G x 58 Ex8 3 x 12 mm Hx4 I x4 Jx4 M x 13 Nx6 O x 24 3 x 14 mm Kx6 Lx6 4 x 16 mm Px4 4 x 30 mm Q x 16 6 x 40 mm 3/24 3.
1 7 4 18 3 12 6 5 11 7 16 10 2 9 17 13 8 14 14 17 16 15 23 24 25 22 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 Ox8 N-1 x 4 3.5 x 12 mm O 4 N-1 O 4 5 O O O 180° O 180° 4 5 O O O Fix slide rail(N-1) to board 4 and 5 respectively with screw(O) as shown. Flip the two boards 180°, fix slide rail(N-1) as well.
A x 12 2 Gx8 8 x 30 mm Ix4 3 x 14 mm G G A 9 11 GG A G G A G G I 11 9 I A I A G I G I Screw eccentric rod(A) into board 2, 3, 9 and 11 with a screwdriver as shown. Fix hinge(I) to board 9 and 11 with screw(G) as shown.
Ax4 3 Dx4 8 x 30 mm G 3 x 14 mm Px4 3 x 14 mm 6 x 40 mm GG G 6 F F A G G GG Gx6 Fx3 6 F 6 A A A F A 4 6 P D Screw eccentric rod(A) into board 6 with a screwdriver as shown. Fix part(F) to board 6 with screw(G) as shown. Attach board 4 and 5 to board 6 using LONG wooden dowel(P), and fix with screw(D) as shown.
4 Bx4 Cx4 Connect board 10 to board 9 and 11 using wooden dowel(C), add cam lock(B) into board 10 and turn clockwise to tighten as shown.
Bx4 5 Connect board 6 to board 9 and 11, add cam lock(B) into board 9,11 and turn clockwise to tighten as shown.
6 Ax4 Cx4 Dx4 8 x 30 mm 8 x 30 mm A 13 A A A A 13 Screw eccentric rod(A) into board 13 with a screwdriver as shown. Attach board 13 to board 9 and 11 using wooden dowel(C), and fix with screw(D) as shown.
7 Bx4 Cx4 Attach board 14 to board 13 using wooden dowel(C) at first, add cam lock(B) into board 14 and turn clockwise to tighten as shown.
Bx8 8 Cx8 C B 6 3 180° B C C 3 C 6 C B 13 B B C B C B 2 C C B B Attach board 2 and 3 to board 6 and 13 using wooden dowel(C) at first, add cam lock(B) into board 6,13 and turn clockwise to tighten as shown.
A x 14 9 Bx2 8 x 30 mm O Gx8 Cx2 Jx4 3 x 14 mm O A J 12 8 A G A G J G A J G A G G 8 G J G A J A 12 A A Screw eccentric rod(A) into board 8, 12 and 15 with a screwdriver as shown. Connect board 12 and 8 to board 15 using wooden dowel(C), add cam lock(B) into board 15 and turn clockwise to tighten as shown. Fix hinge(J) to board 12 and 8 with screw(G) as shown.
B x 12 10 Cx6 Attach the assembled part to board 2, 3, 13 and 14 using wooden dowel(C), add cam lock(B) and turn clockwise to tighten as shown.
11 Dx4 Cx4 4 x 40 mm 3 7 D Attach board 7 to board 2 and 3 using wooden dowel(C), and fix with screw(D) as shown.
12 Ox4 N-1 x 2 3.5 x 12 mm N-1 O O Fix slide rail(N-1) to board 7 with screw(O) as shown.
Ax8 13 8 x 30 mm Insert back board 18 along available grooves as shown. Screw eccentric rod(A) into board 1 with a screwdriver as shown.
14 Bx8 Cx8 Cover board 1 to board 2, 5, 4 and 3 using wooden dowel(C) at first, add cam lock(B) and turn clockwise to tighten as shown.
15 Ex8 3 x 12 mm G x 16 Q x 16 3 x 14 mm Q Q Insert buckle(Q) into back slots and fix with screw(G) as shown. Fix back board to the cabinet with screw(E) as shown.
G x 10 16 Kx2 Hx2 3 x 14 mm Lx2 4 x 16 mm G 16 H 17 G G G H G H L G K 16 L K G G G 17 L 16 K Fix knob(L) to board 16 and 17 with screw(K). Fix part(H) to board 16 and 17 with screw(G). Fix board 16 and 17 to hinges using screw(G) as shown.
17 G x 10 Hx2 3 x 14 mm Kx2 Lx2 4 x 16 mm G 16 G H 17 G G G G G G H L H G K L K 16 17 L K Fix knob(L) to board 16 and 17 with screw(K). Fix part(H) to board 16 and 17 with screw(G). Fix board 16 and 17 to hinges using screw(G) as shown.
Ax8 18 Bx8 8 x 30 mm A Mx8 4 x 30 mm A 21 A A B A 22 B A 23 21 180° B B 22 21 B B Screw eccentric rod(A) into board 21. 21 Attach board 22 and 23 to board 21, add cam lock(B) and turn clockwise to tighten. Insert bottom board 25 along grooves. Fix board 24 to board 22 and 23 with screw(M) as shown.
19 Ax5 Mx5 Bx5 8 x 30 mm A 4 x 30 mm A 21 B 22 B AA 21 180° A 23 B B 27 AA B 19 22 B Screw eccentric rod(A) into board 19. B Attach board 22, 27 and 23 to board 19, add cam lock(B) and turn clockwise to tighten. Insert bottom board 26 along grooves. Fix board 20 to board 22, 27 and 23 with screw(M) as shown.
Kx3 20 Lx3 O x 12 N-2 x 6 4 x 16 mm 3.5 x 12 mm 22 O N-2 O O 23 N-2 O K x2 23 22 O N-2 22 O N-2 N-2 O K 21 O O L O K 21 L 24/24 19 L Fix runner(N-2) to board 22 and 23 with screw(O).Fix knob(L) to board 21 and 19 with screw(K). Insert the drawers in.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
