Sideboard Version:12/05/2022 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 28 6 x 35 mm Ex4 B x 31 C x 18 4 x 40 mm 6 x 30 mm Fx4 G x 68 D x 28 15 x 9 mm Hx8 3 x 12 mm Jx2 Kx2 Lx2 350 mm Nx4 P x 12 Q x 22 4 x 25 mm 3.
16 14 15 8 10 14 9 21 1 3 4 2 6 21 5 7 11 12 12 20 13 18 12 19 23 17 12 25 22 24 23 25 22 26 4/18 24 27
L x1 1 Gx 6 350 mm 3 x 12 mm Fix slide rail(M) to plate 1 using screw(G) as shown. Flip the plate, fix slide rail(L) as shown. Mx1 350 mm G G L G 1 G G 1 G G M 1 L Ax2 2 6 x 35 mm A A 2 A 2 Insert quickfit screw(A) into corresponding holes in plate 2 with a screwdriver as shown.
3 Dx 2 Bx2 15 x 9 mm 6 x 3 0 mm Connect plate 3 with plate 2 using wooden dowel(B), put cam lock(D) into holes in plate 3 and turn clockwise to tighten as shown. D 3 D 4 B D 2 Bx2 Cx2 6 x 3 0 mm 1 B 4 x 40 mm 3 B Connect plate 1 with plate 3 and 4 using wooden dowel(B), then fix using screw(C) as shown.
L x1 Ax2 5 Gx 3 3 x 12 mm 350 mm 6 x 35 mm Fix slide rail(L) to plate 5 using screw(G) as shown. Insert quickfit screw(A) into G plate 5 as shown. A G G A L G 5 A 5 6 Mx1 Ax2 Gx 3 3 x 12 mm 350 mm 6 x 35 mm Fix slide rail(M) to plate 6 using screw(G) as shown. A G G G A G A M M 6 6 Insert quickfit screw(A) into plate 6 as shown.
Dx 4 7 Bx6 15 x 9 mm 6 x 3 0 mm Connect plate 5 and 6 with plate 2,3 and 4 using wooden dowel(B),put cam lock(D) into B holes in plate 3,4 and turn clockwise to tighten as shown. B 2 D B 3 B D D B B 6 B 4 D 4 5 D Ax1 8 6 x 35 mm Insert quickfit screw(A) into plate 7 as shown.
Ax1 6 x 35 mm A A 8 8 Insert quickfit screw(A) into plate 8 as shown. 10 Dx 2 15 x 9 mm 9 D 8 D 8 9 D 7 1 6 5 Place plate 9 to plate 5,1 and 6 at first. Connect plate 7 and 8 with plate 9, put cam lock(D) into holes in plate 9 and turn clockwise to tighten as shown.
11 Slide plate 10 along grooves in plate 5 and 6 as shown. 6 4 5 10 12 Bx8 6 x 3 0 mm Cx8 4 x 40 mm Fix plate 11 to plate 7,5,6 and 8 with wooden dowel(B), then fix using screw(C) as shown.
P x 12 13 Nx4 4 x 25 mm X4 Fix iron plate(N) to leg 12 using screw(P) as shown. P N 12 14 Q x 20 3.5x 12 mm Fix leg 12 and leg support 13 to plate 11 using screw(G) as shown.
15 Slide back plate 14 and 15 along grooves as shown. 14 6 15 14 8 5 7 16 A x 12 Kx2 Qx2 4 x 12 mm 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 16 as shown. Fix part(K) to plate 16 using screw(Q) as shown.
17 D x 12 B x 13 15 x 9 mm 6 x 3 0 mm Cover plate 16 to the top with wooden dowel(B), put cam lock(D) into holes in plate 7,5,1,6,8,9 and turn clockwise to 16 tighten as shown. B D 6 8 1 16 5 B 8 7 18 D Gx 8 E x4 3 x 12 mm E G G E G E G E 18 17 G E Fix hinge(E) to plate 17 and 18 using screw(G) as shown.
19 Gx 8 Fx 4 3 x 12 mm G F G G F F 20 G F 19 G F Fix hinge(F) to plate 19 and 20 using screw(G) as shown. 20 G x 32 3 x 12 mm Attach door plate by fixing hinge using screw(G) as shown.
J x2 Hx8 21 Cx2 4 x 40 mm J Drill holes on wall, knock part(J) into. Insert part(H) into side plate, then place shelf 21 in. K C 14 K J Wall C 21 J H C 21 H H C Cx8 22 4 x 40 mm X2 Fix plate 22 and 23 with plate 24 using screw(C) as shown.
Ax8 23 6 x 35 mm A A A 26 A A 26 A A A 27 A Insert quickfit screw(A) into plate 26 and 27 as shown. 24 Dx 8 15 x 9 mm Slide plate 25 along grooves. 23 25 22 22 D D D 26 27 Attach plate 26/27, put cam lock(D) into holes in plate 22,23 and turn clockwise to tighten as shown.
Gx 8 25 3 x 12 mm Lx2 Mx2 350 mm 350 mm Fix runner(L) and (M) to plate 22 and 23 respectively using screw(G) as shown. G 23 22 22 G L 26 27 L G G 26 Align rails, slide drawers.
27 If there is misalignment after you install, adjust the screw to the best condition 18/18
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
