Cupboard Version:06/029/2022 1/22
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 41 6 x 35 mm E x 22 B x 41 C x 20 15 x 9 mm 6 x 50 mm Fx6 Gx6 3.
1 4 18 8 7 19 20 9 6 10 23 10 2 16 5 12 21 13 22 11 16 8 16 6 3 17 14 17 15 17 4/22
A x 15 1 6 x 35 mm Insert quickfit screw(A) into corresponding holes in board 1,2,4,14 with a screwdriver as shown.
A x 14 2 6 x 35 mm Insert quickfit screw(A) into corresponding holes in board 3,5,7,13 with a screwdriver as shown.
Cx8 3 E x8 6 x50 mm 4 x35 mm Attach another two board 11 to board 10, repeat the previous step. 11 11 C C C C 10 E C E E 11 E E 11 C Attach board 11 to board 10 with long wooden dowel(C) at first, then fix with screw(E) again. Please note the long wooden dowel must penetrate through board 10. 4 C 10 C E E 10 E E Dx4 6 x30 mm Attach board 9 to board 11 with short wooden dowel(D) as shown. Attach board 11 to D board 10 as shown.
5 Bx4 Cx4 D x 12 15x9 mm 6 x50 mm 6 x30 mm 7 C B 8 7 C B D D 4 8 9 D B D C B C D D 10 D C 10 D D D D Attach board 4 to board 8,9,10 with short wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown. Attach board 7 to board 8,9,10 with long wooden dowel(C), insert cam lock(B) into board 8, and turn clockwise to tighten as shown. Please note the long wooden dowel must penetrate through board 7.
6 Ax4 6 x 35 mm Insert quickfit screw(A) into corresponding holes in board 7 as shown. A A 7 A A A 7 Bx4 15x9 mm Attach board 6,23 to board 7 and turn cam locks(B) clockwise to tighten as shown.
8 Bx4 Dx 4 15x9 mm 6 x30 mm Attach board 2 to board 6,23 with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
9 Bx6 Dx 6 15x9 mm 6 x30 mm Cover board 1 to the unit with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
10 Cx6 Dx 4 6 x30 mm 6 x50 mm Insert long wooden dowel(C) into board 4,7,2. Insert short wooden dowel(D) into board 11. 2 C 7 11 4 11 11 C D C E x 10 D C C D C D 4 x 35 mm Attach board 12 to the component with screw(E). 2 2 7 4 12 11 E 11 E E Please note the long wooden dowel must penetrate through board 12.
12 Ax6 6 x 35 mm Insert quickfit screw(A) into corresponding holes in board 12 as shown.
13 Bx3 Dx 4 E x2 15x9 mm 6 x30 mm 4 x35 mm Attach board 13 to board 14 with wooden dowel(D) at first, then fix with screw(E) again. Attach board 15 to board 14 with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
14 Bx7 Cx2 Dx 5 15x9 mm 6 x50 mm 6 x30 mm 13 C B 13 B 5 B 8 D D B 14 C B D C B 15 B D D Attach board 8 to board 13 with long wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown. Please note the long wooden dowel must penetrate through board 13. Attach board 5 to board 8 with short wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
15 Ax2 6 x 35 mm A 13 A Insert quickfit screw(A) into board 13 with a screwdriver as shown. A 16 Bx7 Dx 5 15x9 mm 6 x30 mm D 3 3 D B B D 6 B B 13 B B D B 14 15 16/22 D Attach board 6 to board 13 and turn cam locks(B) clockwise to tighten as shown. D Attach board 3 to board 6,14,15 with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
Bx6 15x9 mm B B 12 B B B 13 B B 5 Connect two assembled components and turn cam locks(B) clockwise to tighten as shown.
K x 56 3 x 12 mm K J Fix back board 18,19,20,21,22 with nail(K) as shown. 3 x 12 mm K x56 18 19 20 21 22 K 18/22 3.
Gx 6 F x6 19 H x 12 J x 24 4 x 16 mm 3.5 x 12 mm Fix hinge(H) to board 16,17 with screw(H) as shown. Fix knob(F) with screw(G) as shown.
J x 24 3.5 x 12 mm Attach board 16 to upper cabinet by fixing hinge with screw(J) as shown. 4 J J J 16 J 2 J 16 J 16 5 13 J J 17 J 17 3 J 17 J Attach board 17 to lower cabinet by fixing hinge with screw(J) as shown.
If there is misalignment after you install, adjust the screw to the best condition 21/22
E x2 4 x 35 mm L x2 Mx 2 4 x 14 mm 6 x 30 mm P x4 Nx2 12 x 4 mm Fix part(N) to board 1 with washer(P) and screw(L) at first. Fix part(M) to a proper position on your wall, fix part(N) to part(M) with washer(P) and screw(E) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
