Cabinet Version:12/05/2022 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 66 6 x 35 mm B x 48 C x 34 6 x 30 mm Ex6 Fx6 Drawer Glide(Left) Drawer Glide(Right) 4 x 35 mm G x 110 D x 66 15 x 9 mm Hx6 3 x 12 mm Jx8 Kx9 Lx9 4 x 16 mm N x 24 Px2 3/18 Mx2
17 13 16 11 15 11 12 18 10 x3 12 11 8 10 14 6 7 4 4 5 3 4 4 25 2 21 20 22 19 1 x6 24 2 x3 23 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Ax6 1 6 x 35 mm A A 1 A A A A 1 A 25 Dx 6 2 Insert quickfit screw(A) into corresponding holes in plate 1 and 25 with a screwdriver as shown. Bx4 15 x 9 mm 6 x 30 mm Insert wooden dowel(B) into plate 1 and 25 respectively at first, attach plate 2 then. Put cam lock(D) into holes in plate 2 and turn clockwise to tighten as shown.
Ax4 3 E x3 F x3 G x 12 3 x 12 mm 6 x 35 mm G A G G G A A G F G F G A 3 G 3 G E F G G E G E 3 Insert quickfit screw(A) into corresponding holes in plate 3, fix slide rail(E) with screw(G) at first. Flip the plate 180°, insert quickfit screw(A) and fix slide rail(F) with screw(G) as shown. Dx 4 4 Bx4 6 x 30 mm 15 x 9 mm Insert wooden dowel(B) into two sides of plate 3 at first, attach plate 4 then. Put cam lock(D) into holes in plate 4 and turn clockwise to tighten as shown.
Bx2 Cx2 5 4 x 35 mm 6 x 30 mm Insert wooden dowel(B) into plate 3 at first, attach the two components (aasembled in step 2). 3 B B C 1 C 25 C 1 A x 12 6 Fix plate 25 and 1 to plate 3 with screw(C) as shown. E x3 F x3 G x 12 6 x 35 mm 3 x 12 mm G A G G G G A A F G F G A G G E E 5 G E A 6 A A A A G A G F A A A Insert quickfit screw(A) into corresponding holes in plate 5 and 6 at first. Fix slide rail(E) to plate 5; fix slide rail(F) to plate 6 with screw(G) as shown.
D x 12 7 B x 12 6 x 30 mm 15 x 9 mm Insert wooden dowel(B) into two sides of plate 4,1, 2 and 25 at first, attach plate 5 and 6 then. Put cam lock(D) into holes in plate 4,1,2,25 and turn clockwise to tighten as shown. 4 D B D D B B D D B B B B B B 4 B 5 6 4 4 B D B B D B 1 2 6 D 2 D D 25 1 This step is best done in collaboration with two people to prevent the board from falling off. 8 Slide plate 7 along grooves as shown.
Ax8 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 8 and 15 with a screwdriver as shown. A A A 15 A A A A 8 A 15 A 10 Dx 4 Bx 4 15 x 9 mm 6 x 30 mm Insert wooden dowel(B) into plate 15 at first, attach plate 10 then. Put cam lock(D) into holes in plate 10 and turn clockwise to tighten as shown.
11 Dx 4 Bx4 15 x 9 mm 6 x 30 mm Slide plate 11 along grooves as shown. Insert wooden dowel(B) into plate 10 at first, attach plate 8 then. Put cam lock(D) into holes in plate 10 and turn clockwise to tighten as shown. 10 B D B 10 B 11 B D 8 10 B D 12 Ax6 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 14 with a screwdriver as shown.
13 Bx6 Cx6 4 x 35 mm 6 x 30 mm Slide plate 11 along grooves as shown. Insert wooden dowel(B) into plate 8,15 and 13 at first, attach plate 14 then. Fix plate 14 with screw(C) as shown. 13 B 13 B 15 B 8 B 14 B B C 11 C 14 B C C C 14 Slide plate 11 and 16 along grooves as shown.
15 Ax6 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 17 with a screwdriver as shown. A A A 17 A A 17 A 16 A Bx6 Dx 6 15 x 9 mm 6 x 30 mm 17 B D B D 15 BD B B D B D 13 17 B 13 D D Insert wooden dowel(B) into plate 8,15 and 13 at first, cover plate 17 then. Put cam lock(D) into holes in plate 8,15,13 and turn clockwise to tighten as shown.
17 Dx 6 Bx6 6 x 30 mm 15 x 9 mm 14 D B D B B B B D 6 D D 14 B D 3 B D Insert wooden dowel(B) into plate 5,3 and 6 at first, connect the two components then. Put cam lock(D) into holes in plate 5,3,6 and turn clockwise to tighten as shown. 5 18 Mx2 G x 26 N x 24 3 x 12 mm G G M 16 M 17 11 11 Reinforce back plate using part(N) with screw(G) as shown. Fix anti-tipping device(M) to plate 17 using screw(G) as shown.
19 Hx6 Kx3 G x 12 Lx3 4 x 16 mm 3 x 12 mm x3 G G H G Fix hinge(H) to plate 18 with screw(G) as shown. Fix knob(K) with screw(L) as shown. G 18 H L 18 H K 20 G x 24 3 x 12 mm Fix three doors to plate 8,15 and 13 respectively with screw(G) as shown.
21 A x 24 Kx6 Lx6 6 x 35 mm 4 x 20 mm A x3 24 A A L A A A A x3 24 K 23 A A Insert quickfit screw(A) into plate 23 and 24 as shown. Fix knob(K) with screw(L) as shown. 22 C x 24 4 x 35 mm x6 Q 21 Q Q Q 20 19 21 Q Q 19 Fix plate 19 and 20 to plate 21 with screw(C) as shown.
23 Slide plate 22 along grooves as shown. 22 x6 Ex3 G x 12 24 Fx3 D x 12 15 x 9 mm 3 x 12 mm x3 D 20 19 D D Attach plate 23 to plate 19 and 20, turn cam lock(D) clockwise to tighten as shown. Fix runner(E) and (F) to plate 19 and 20 respectively using screw(G) as shown.
G x 12 25 Ex3 D x 12 Fx3 3 x 12 mm 15 x 9 mm X3 D 20 D Attach plate 24 to plate 19 and 20, turn cam lock(D) clockwise to tighten as shown. Fix runner(E) and (F) to plate 19 and 20 respectively using screw(G) G as shown. F 20 G 19 D 24 D 19 D 24 19 D G E G 26 P x2 Cx2 Gx 8 24 x3 4 x 35 mm Install anti-tipping deivce as shown. Insert part(G), and place shelf 12 in as shown.
27 If there is misalignment after you install, adjust the screw to the best condition 18/18
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
